Quick View		(larger image)
Built In:	Power failure, Sound level, Backup Battery Voltage
Inputs:	Expandable up to 40 Inputs 8 Universal included: Dry Contact, Temperature, 4-20mA, 0-5VDC, Run Time, Pulse Count
Outputs:	1 Form-A Relay included, expandable up to 17
Notifications:	48 custom voice or numeric pager numbers
Special  Features:	NEMA-4X Sealed weatherproof housing, input expandability
Part  Numbers:	Sensaphone Express II FGD-6700
Sensaphone Express II Functional Diagram
(click for larger image)

Sensaphone Express II

The Express II is able to grow when your application grows.

The robust Sensaphone Express II features advanced monitoring capabilities, plus allows for expansion of to 40 input/output channels. Easy to install, program, and expand, Express II can meet the needs of your system both today and tomorrow.

The Express II is as flexible as your application requires, with features like built-in power failure monitoring, 8 universally-configurable alarm inputs, and an on-board relay output for manual or automatic switching.

It offers a wide range of temperature sensing (-85°F to 300°F), 48 user-programmable dial out numbers, and complete remote touch-tone programming capability.

Descriptive messages can be recorded for site identification and for each alarm input. Alarm-specific dialing and programmable call schedules allow users to customize the Express II's dialing process.

The Express II is equipped with a gel-cell rechargeable battery that will provide 12 hours of backup time. The unit is housed in a NEMA-4X fiberglass enclosure with a front panel LCD and dual-color LEDs to indicate input status to on-site personnel. All programming settings and voice message are stored in nonvolatile memory.

Sensaphone Express II

Accessories

	Express II 8 Input Card Slot 2 Product # FGD-0035 Expands the inputs on your Sensaphone Express II with eight more channels. Labeled for Inputs 9 - 16.
	Express II 8 Input Card Slot 3 Product # FGD-0036 Expands the inputs on your Sensaphone Express II with eight more channels. Labeled for Inputs 17 - 24.
	Express II 8 Input Card Slot 4 Product # FGD-0037 Expands the inputs on your Sensaphone Express II with eight more channels. Labeled for Inputs 25 - 32.
	Express II 8 Input Card Slot 5 Product # FGD-0038 Expands the inputs on your Sensaphone Express II with eight more channels. Labeled for Inputs 33 - 40.
	Express II 8 Output Card Slot 1 Product # FGD-0040 Adds eight relay outputs to your Sensaphone Express II. Labeled for Outputs 1 - 8.
	Express II 8 Output Card Slot 2 Product # FGD-0041 Adds eight more relay outputs to your Sensaphone Express II. Labeled for Outputs 9 - 16.
	Accessory Wire Product # FGD-0010 50ft. of 22-gauge shielded wire for connecting sensors to your sensaphone.
	Mini Surge Protector - Power and Phone Product # FGD-0067 The Traveler surge suppressor offers complete AC and phone line surge suppression for your Sensaphone and other electronic devices. The compact housing weighs less than 4 ounces. The retractable plug prevents scratching of expensive portable electronics. A set of RJ11 telephone line suppression jacks protect dialup and voice/modem lines. The suppressor offers 2 total outlets in a space saving direct plug-in format and diagnostic LEDs to warn of wiring problems and suppressor damage. $50,000 Ultimate Lifetime Insurance (USA & Canada Only).
	Multi-Point Wireless I/O Product # FGD-0205 The multi-point wireless I/O system is ideal if you need to connect one or two dry contacts and/or a 4-20mA transducer to a Sensaphone that is too far (or too expensive) to run cable. The system will replicate these sensors up to a distance of 600′ indoors or up to 4 miles line of site (flat terrain, raised antennas). The system includes a matched 1 Watt 900MHz transmitter and receiver. Two 24V power supplies and omnidirectional antennas are included. Built-in leds indicate RF link and dry contact status.
	J Type Thermocouple/4-20mA Converter Product # FGD-0220 The thermocouple to 4-20mA converter is useful when monitoring very high or very low temperatures that can not be monitored with a standard Sensaphone temperature sensor. Thermocouples are available in a variety of packages that may be perfectly suited to your measuring application. Each thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, linearized and converted to a 4-20mA output. Isolation is provided by transformer coupling, using a proprietary technique to suppress transmission of common mode spikes or surges. The modules have excellent stability over time and do not require recalibration.
	Bluetooth Cell Phone Interface Product # FGD-0230 The XLink allows your Sensaphone to dial and receive calls using any cell phone with Bluetooth technology. For example, suppose land-line telephone service was unavailable at the Sensaphone's location. By using the XLink you can provide telephone service to your Sensaphone by locating a cell phone next to the device. The XLink will send all incoming calls to the Sensaphone and when the Sensaphone needs to dial out the call will be seamlessly completed through the cell phone. The XLink is a wireless (Bluetooth) link between your Sensaphone and a cellular phone. This can be a cost-effective option considering that many cellular providers offer inexpensive options to add another phone. Perfect for access where a land line simply isn't available, the XLink is a must.

Sensaphone Express II

Sensors

	Magnetic Reed Switch Product # FGD-0006 The magnetic reed switch may be used with all Sensaphone models to detect any unauthorized entry or intrusion. They are usually installed on doors and windows to detect their opening and closing. Several magnetic reed switches may be wired in series.
	Infra-Red Motion Detector Product # FGD-0007 The passive infra-red motion detector can be used with all Sensaphone models to monitor the movement of warm bodies in a specific area. It will cause an alarm if motion is detected. Its range of detection covers approximately forty feet of area. Multiple sensors can be wired in series to a single output.
	Spot Water Detector Product # FGD-0013 The water detection sensor can be used with all Sensaphone models to detect the presence of water on a horizontal surface. Independently powered by internal lithium batteries. The batteries should last for approximately 3-5 years. When the batteries start to run down, the sensor will automatically cause an alarm dial out when no water is present. Multiple sensors can be wired in series to a single input.
	Temp Alert Product # FGD-0022 The Temp Alert can be used with all Sensaphone models to monitor air temperature from -30° to 130°F (-34° to 54°C). Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When the temperature exceeds the setting, the sensor triggers an alarm. The temp alert can be mounted to any wall or vertical surface. Multiple temp alerts may be wired in parallel to a single input. It requires no power for operation and mounts easily on any flat surface.
	Humidistat Product # FGD-0027 The Humidistat can be used with all Sensaphone models to detect a high or low humidity level. The device will cause your Sensaphone to activate an alarm when the humidity level reaches a set threshold. Made from high impact plastic with a brushed goldtone dial plate and a beige cover. A nylon sensing element provides long life and accurate humidity control. With a range of 10% to 60% RH level, the sensor causes an alarm when the humidity exceeds or falls below the set limit. Multiple sensors may be wired to a single input.
	Smoke Detector 110VAC Product # FGD-0049 The Smoke Detector with built-in relay utilizes a photoelectric sensing method and is designed for use in commercial and residential applications. The device requires hard-wired 120VAC 60Hz power. The detector features two sets of dry alarm contacts: one form-A SPST and one form-C SPDT. The detector has tandem interconnect capability allowing up to 6 devices to be connected together. A 90dBA audible horn is included. The detector can be used with all Sensaphone models.
	Smoke Detector 110VAC with Battery backup Product # FGD-0049-B The Smoke Detector with built-in relay utilizes a photoelectric sensing method and is designed for use in commercial and residential applications. The device requires hard-wired 120VAC 60Hz power, but also includes internal battery backup. The detector features two sets of dry alarm contacts: one form-A SPST and one form-C SPDT. The detector has tandem interconnect capability allowing up to 6 devices to be connected together. A 90dBA audible horn is included. The detector can be used with all Sensaphone models.
	Humidity Transmitter (4-20mA) Product # FGD-0052 A space mount, low profile humidity transducer. Transmits actually humidity levels to Sensaphone for programmable high and low alarm limits. Does not come with wire.
	PowerOut Alert Model PS-110 Product # FGD-0054 A compact power outage monitoring device to detect power failures. Easily plugs into any 110 VAC receptacle outlet for operation. Comes with 15 feet of wire.
	Zone Water Detector Product # FGD-0056 The Sensaphone zone water detector is for detecting the presence of water on a floor or in a FALSE ceiling. It comes with 10′ of WaterRope capable of covering a larger area than the FGD-0013 water sensor. Up to ten WaterRopes can be cascaded from a single sensor for even greater coverage. Works with all Sensaphone products and operates on two AA batteries (installed).
	Extra 10′ Water Detection Rope Product # FGD-0063 Extends the water detection rope on the FGD-0056 sensor by an additional 10 feet.
	Carbon Monoxide (CO) Sensor Product # FGD-0065 Carbon Monoxide is a highly toxic gas that has no color or odor. The Sensaphone Carbon Monoxide sensor will allow you to monitor CO levels from 0-300 ppm with any Sensaphone that will accept a 4-20mA input signal. The 1″ x .5″ LCD displays the PPM and menu parameters. The sensor will require a 24VDC power supply to operate (Part # FGD-0053).
	Air Quality Sensor Product # FGD-0066 The Sensaphone Indoor Air Quality sensor will allow you to monitor levels of pollution from 0–100% with any Sensaphone that will accept a 4-20mA input signal. Popular applications include schoolrooms, office buildings, and parking garages. The Air Quality sensor uses a tin dioxide semiconductor sensor to detect oxidizable gases and is specially designed to have high sensitivity to gaseous organic materials which are components of indoor air pollutants. These air contaminants include cigarette smoke, cooking exhaust, automobile exhaust, solvents and many others. The sensor will require a 24VDC power supply to operate. (Part # FGD-0053)
	Carbon Dioxide (CO2) Sensor Product # FGD-0068 The Sensaphone Carbon Dioxide sensor will allow you to monitor levels of Carbon Dioxide from 0-2,000ppm with any Sensaphone that will accept a 4-20mA input signal. The sensor will need a 24VDC power supply to operate (Part # FGD-0053)
	Remote Temperature Sensor 2.8K Product # FGD-0100 The 2.8K Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured, however this model is recommended to be located in clean, dry environment. For outdoor use model FGD-0101 is recommended.
	2.8K Weatherproof Temperature Sensor Product # FGD-0101 The 2.8K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments. This is a highly recommended sensor for every cold storage application above -20°F. For colder temperatures we recommend using sensor part number FGD-0101-TEF. NIST temperature certification is available.
	2.8K Ultra Low -85°C Temperature Sensor with Teflon Product # FGD-0101-TEF The 2.8K Ultra Low -85°C Temperature Sensor with Teflon enables monitoring temperatures at a location away from a Sensaphone unit. The Teflon coated wire will withstand temperatures down to -85°C. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments. NIST temperature certification is available.
	10K Remote Weatherproof Temperature Sensor Product # FGD-0102 The 10K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments.
	10K Indoor Decorator Zone Temperature Sensor Product # FGD-0103 The 10K indoor decorator zone temperature sensor offers precision room temperature sensing in an attractive wall-mounted enclosure. Accurate to 0.36°F (0.2°C) with a sensing range of 35° to 140°F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate. The sensor is designed to be wall-mounted indoors where appearance is important. The separate base plate may be mounted directly to the drywall or on a standard electrical outlet box without adapters. The cover is secured with tamper resistant hex screws.
	10K Outdoor Air Weatherproof Temperature Sensor Product # FGD-0104 The 10K Outdoor Air Weatherproof Temperature sensor is a sensitive temperature element with a stainless steel tube sheathe. It is mounted inside a ventilated, treated weather-resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy outdoor installation. Accurate to ±0.36°F (0.2°C) with a sensing range of -30° to 140°F. Eight feet of 24AWG wire is included.
	10K Immersion Temperature Sensor Product # FGD-0105 The 10K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of brass WEL-B thermowell (which screws into a customer-supplied 0.5″ NPT saddle or Thredolet® fitting in a pipe). It fits into a thermowell via a brass 0.125″ NPT fitting. Accurate to ±0.36°F (0.2°C) and has a sensing range of 10° to 230°F. It also includes 8′ of 24AWG wire.
	2.8K Temperature Sensor with Glass Bead Vial Product # FGD-0107 The FGD-0107 is ideal for cold storage temperature monitoring. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated. This is a highly recommended sensor for every cold storage application above -20°F. For colder temperatures we recommended using sensor part number FGD-0107-TEF.
	2.8K Ultra Low -85°C Temperature Sensor with Glass Bead Vial and Teflon Cable Product # FGD-0107-TEF The FGD-0107-TEF is ideal for cold storage temperature monitoring. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated. The Teflon coated wire will withstand temperatures down to -85°C. This is a highly recommended sensor for every cold storage application below -20°F.
	Float Switch Product # FGD-0222 The FGD-0222 float switch is a plastic side mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. This style float switch can be rotated for Normally Open or Normally Closed operation. Combine two switches at different levels for high and low level or pump control or alarming.

Sensaphone Express II

Specifications

Name:	Sensaphone Express II
Product #:	FGD-6700
Monitoring Capacity:	8 universal input channels standard configurable as: Normally open dry contact Normally closed dry contact Pulse counter 4-20mA analog with custom look up table 0-5 Volt analog with custom look up table
	Built-in power failure monitoring
	Built-in sound level monitoring (smoke or fire alarm)
Output Type:	1 built-in relay, SPST latching 2A 250 VAC
Expansion:	32 additional channels available for input/output expansion
Programming:	All parameters can be programmed from the local keypad or any remote touch-tone phone
Message Length:	User selectable 5, 7 or 11 seconds per input channel
Message Types:	1 recorded ID message
	1 recorded alarm message for each input channel
Telephone Numbers:	Total of 48 phone numbers with 32 digits each
	Allows alarm specific dialing
	Multiple phone lists for day/night/weekend
Dialing Format:	Touch-tone, pulse, or auto-detect
Phone Connector:	RJ11C
Activity Log:	Built in RS232 port
	Can automatically print alarm activity to a local printer
Local Indications:	Built in LCD display to show alarm dialing status
	Dual-color LED indication for each input channel
Power Requirements:	110VAC/220VAC
Internal Battery Backup:	12 hour Gel Cell with built-in charger
Operating Temperatures:	32-120 degrees F
Operating Humidity:	0-90%, non-condensing
Storage Temperatures:	0-130 degrees F
Dimensions:	14.4″ x 12.4″ x 7.3″
Weight:	15 lbs.
Enclosure:	NEMA-4 fiberglass with latched window cover

Sensaphone Express II

Support Documents/Downloads

	Sensaphone Express II Manual (pdf)
	Sensaphone Express II Engineering Specifications (pdf)
	Sensaphone Express II Troubleshooting (pdf)
	Sensaphone Express II Brochure (pdf)