Quick View		(larger image)
Built In:	Power failure
Inputs:	8
Outputs:	1 relay
Notifications:	E-mail, SNMP trap, and text message are standard. Voice phone call and fax with phone option.
Special  Features:	Live webserver, rack mount, ethernet with optional phone backup, IP monitoring.
Part  Numbers:	IMS-1000 Single Room Monitoring Solution IMS-1001
	IMS-1000 Single Room Monitoring Solution w/ International Power Supply IMS-1001-INT
	IMS-1000 Single Room Monitoring Solution w/ Modem IMS-1002
	IMS-1000 Single Room Monitoring Solution w/ Modem and International Power Supply IMS-1002-INT
IMS-1000 Functional Diagram
(click for larger image)

IMS-1000 Single Room Monitoring Solution

The ultimate choice for remote monitoring and control where telephone lines are non-existent or too expensive.

The New IMS-1000 offers web-based monitoring for everyone

Sensaphone's latest development, the IMS-1000, provides a flexible, web-based monitoring system for many applications. It connects to any Ethernet network and has a built in web server for viewing status, making programming changes, and reviewing data log history. Up to eight sensors can be connected to monitor a wide variety of conditions including temperature, humidity, physical security, smoke, fire, power, etc. The IMS 1000 is perfect for cold storage applications and even accepts a new -85°C temperatures sensor. It also includes one relay output to switch a local device on or off depending on alarm activity. Power failure monitoring is built-in along with a rechargeable battery backup.

Alarm notification is delivered by sending e-mail messages and text messages. An upgrade is available to also include a telephone connection that adds custom voice alarm phone calls. With the phone option users can also call in for a voice status just like most other Sensaphone products.

If the IMS-1000 is going to be used in a computer room, additional computer room features are also built-in. IP device monitoring is included to monitor the proper functioning of the servers on your network. Alarms can also be sent via snmp traps, and all programming parameters are accessible through the IMS-1000 snmp agent.

IMS-1000 Single Room Monitoring Solution

Accessories

	Mini Surge Protector - Power and Phone Product # FGD-0067 The Traveler surge suppressor offers complete AC and phone line surge suppression for your Sensaphone and other electronic devices. The compact housing weighs less than 4 ounces. The retractable plug prevents scratching of expensive portable electronics. A set of RJ11 telephone line suppression jacks protect dialup and voice/modem lines. The suppressor offers 2 total outlets in a space saving direct plug-in format and diagnostic LEDs to warn of wiring problems and suppressor damage. $50,000 Ultimate Lifetime Insurance (USA & Canada Only).
	Bluetooth Cell Phone Interface Product # FGD-0230 The XLink allows your Sensaphone to dial and receive calls using any cell phone with Bluetooth technology. For example, suppose land-line telephone service was unavailable at the Sensaphone's location. By using the XLink you can provide telephone service to your Sensaphone by locating a cell phone next to the device. The XLink will send all incoming calls to the Sensaphone and when the Sensaphone needs to dial out the call will be seamlessly completed through the cell phone. The XLink is a wireless (Bluetooth) link between your Sensaphone and a cellular phone. This can be a cost-effective option considering that many cellular providers offer inexpensive options to add another phone. Perfect for access where a land line simply isn't available, the XLink is a must.
	IMS 7' CAT5 Patch Cable Green Product # IMS-4402 Standard Cat5 Ethernet cable to used for connecting IMS sensors to an IMS-4000 Host, IMS-4000 Node, or IMS-1000.
	IMS 14' CAT5 Batch Cable Black Product # IMS-4403 Standard Cat5 Ethernet cable to used for connecting IMS sensors to an IMS-4000 Host, IMS-4000 Node, or IMS-1000.
	IMS 25' CAT5 Patch Cable Black Product # IMS-4404 Standard Cat5 Ethernet cable to used for connecting IMS sensors to an IMS-4000 Host, IMS-4000 Node, or IMS-1000.
	IMS RJ45 Cable Couplers (F/F) Product # IMS-4405 Connects two Cat5 cables to extend the distance to the IMS sensor. This kit comes with a set of four connectors.
	Extra IMS-1000 Solution Manual Product # IMS-4410 Additional copy of the IMS-1000 Owner's Manual.
	IMS Network Camera, Panasonic Pan Tilt Product # IMS-4421 The Panasonic BLC111A network camera is ideal for monitoring your small business property, data center, or residence. The camera can be used in combination with the IMS-1000 or IMS-4000 systems to send camera snapshots via e-mail when alarms are detected. The camera features a 10x digital zoom function in addition to remote pan and tilt controls. This allows you to control the direction of the camera right from your web browser. The camera also has a built-in microphone so that you can hear sounds from the remote site as well. A privacy mode can be activated either at the camera, or remotely in administrator mode, which will cover the lens.
	IMS Network Camera, Axis Product # IMS-4423 The Axis M1011 is a small network camera ideal for monitoring your small business property, data center, or residence. The camera can be used in combination with the IMS-1000 or IMS-4000 systems to send camera snapshots via e-mail when alarms are detected. The camera offers a high quality yet affordable video surveillance solution. Using progressive scan technology, the camera provides VGA images of moving objects without motion blur. Designed to compliment modern interiors and easy to install and use, the M1011 will not look out of place in the home or office and is ideal for IP camera novices. The Axis M1011 IP security camera has a built-in web server and can be viewed over a Local Area Network (LAN), Wide Area Network (WAN) or via the Internet as a streaming IP webcam.

IMS-1000 Single Room Monitoring Solution

Sensors

	IMS Room Temperature Sensor Product # IMS-4810 The IMS-4810 temperature sensor is designed to connect to the Sensaphone IMS series product line and monitor indoor temperatures. The electrical connection between the sensor and IMS unit is made via RJ-45 patch cable (not included). The sensor may be mounted either on a wall or to a single-gang electrical box. The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS Room Temperature Sensor (°F) w/LCD Readout Product # IMS-4811 The IMS-4811 temperature sensor is designed to connect to the Sensaphone IMS series product line and monitor indoor temperatures. The electrical connection between the sensor and IMS unit is made via RJ-45 patch cable (not included). The sensor may be mounted either on a wall or to a single-gang electrical box. The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS Mini Temperature Sensor Product # IMS-4812 The IMS-4812 Mini Temperature Sensor is designed to connect to the Sensaphone IMS series product line and monitor temperatures in tight locations (for example, inside equipment racks). The electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor may be secured inside equipment using double-sided tape (included) or with tie-wraps. The Mini-Temperature Sensor comes with an attached 7′ cable with a RJ-45 plug on the end. If the sensor is close to the IMS unit, you can plug the sensor directly to an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS Room Temperature Sensor (°C) w/LCD Readout Product # IMS-4813 The IMS-4813 temperature sensor is designed to connect to the Sensaphone IMS series product line and monitor indoor temperatures. The electrical connection between the sensor and IMS unit is made via RJ-45 patch cable (not included). The sensor may be mounted either on a wall or to a single-gang electrical box. The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS Ultra Low Temperature Sensor Product # IMS-4814 The IMS-4814 Ultra Low Temperature Sensor is designed to connect to the Sensaphone IMS product line and monitor temperatures in refrigerators or freezers. The electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor probe may be secured inside equipment using the included clamp or it may be hung using tie wraps. Do not install the black plastic enclosure inside of a refrigerator or freezer. It is available with an optional NIST temperature certification. The Ultra Low Temperature Sensor comes with an attached 7′ cable with an RJ-45 plug on the end and a weatherproof probe with 12′ of cable. If the sensor installation is close to the IMS unit, you can plug it directly into an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input.
	IMS Ultra Low Temperature Sensor w/Calibration Certification Product # IMS-4814-NIST The IMS-4814 Ultra Low Temperature Sensor is designed to connect to the Sensaphone IMS product line and monitor temperatures in refrigerators or freezers. The electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor probe may be secured inside equipment using the included clamp or it may be hung using tie wraps. Do not install the black plastic enclosure inside of a refrigerator or freezer. It is available with an optional NIST temperature certification. The Ultra Low Temperature Sensor comes with an attached 7′ cable with an RJ-45 plug on the end and a weatherproof probe with 12′ of cable. If the sensor installation is close to the IMS unit, you can plug it directly into an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input.
	IMS Temperature w/ Glass Bead Vial Product # IMS-4815 The IMS-4815 Temperature Sensor is designed to connect to the Sensaphone IMS series product line. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm such as defrost cycles, opening of doors and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated. This is a highly recommended sensor for every cold storage application. The Temperature Sensor comes with an attached 7′ cable with an RJ-45 plug on the end and a weatherproof probe with 12′ of cable. If the sensor is close to the IMS unit, you can plug the sensor directly to an IMS environmental input. If the cable is too short you can use a RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via a RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the IMS unit environment input.
	IMS External Probe Temperature Sensor Product # IMS-4816 The IMS-4816 Temperature Sensor with External Probe is designed to connect to the Sensaphone IMS product line and monitor temperatures in areas where a traditional sensor won't fit. The electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor probe may be secured inside equipment using the included clamp or it may be hung using tie wraps. Do not install the black plastic enclosure inside of a refrigerator or freezer. The Temperature Sensor with External Probe comes with an attached 7′ cable with an RJ-45 plug on the end and a weatherproof probe with 12′ of cable. If the sensor installation is close to the IMS unit, you can plug it directly into an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input.
	IMS Room Humidity Sensor Product # IMS-4820 The IMS-4820 humidity sensor is designed to connect to the Sensaphone IMS series product line and monitor indoor humidity levels. The electrical connection between the sensor and IMS unit is made via RJ-45 patch cable (not included). The sensor may be mounted either on a wall or to a single-gang electrical box. The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS Humidity Sensor w/LCD Readout Product # IMS-4821 The IMS-4821 humidity sensor is designed to connect to the Sensaphone IMS series product line and monitor indoor humidity. The electrical connection between the sensor and IMS unit is made via RJ-45 patch cable (not included). The sensor may be mounted either on a wall or to a single-gang electrical box. The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input.
	IMS Water Sensor w/10' Water Product # IMS-4830 The IMS-4830 Water Detection Sensor protects your server and equipment from damaging water leaks from malfunctioning HVAC systems, cafeteria accidents, or any general plumbing failures in your facilities. The IMS-4830 is powered directly by the IMS unit. After mounting the sensor, attach the included 10′ of WaterRope, and simply lay its orange cable around your equipment: place it on the floor or beneath a raised floor; inside a dropceiling or in the rafters between floors; or anywhere you must know about water near your equipment. You can attach additional Water Detection sensors to each other to expand your water leak detection capabilities throughout your facility; alternatively, IMS WaterRopes are designed to plug into each other to widen your perimeter for any individual sensor.
	Extra 10′ Water Detection Rope Product # IMS-4831 Extends the water detection rope on the IMS-4830 sensor by an additional 10 feet.
	IMS External Power Sensor (110/220VAC) Product # IMS-4840 The IMS-4840 External Power Sensor lets you monitor power anywhere within your infrastructure. It reports any loss of power and measures the current voltage in the circuit, allowing you to know the status of each server rack and even of your remote UPS. Any failed generator starts are reported to you immediately. The IMS-4840 can monitor voltage from 0-250VAC 50/60Hz. The Power Sensor connects to the IMS Host or Node via an RJ-45 cable (e.g. CAT5 cable). The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS AC Current Sensor, up to 15 Amps, C13/C14 Product # IMS-4841 The IMS-4841 15A Current Sensor lets you monitor current consumption of a particular device or circuit anywhere within your infrastructure. It reports the actual current flow in the circuit, allowing you to know the current draw from devices such as server racks, UPS and generators. Any failed generator starts are reported to you immediately. The IMS-4841 can monitor current from 0-15 amps over a voltage range from 0-250VAC 50/60Hz. The sensor comes with IEC320 C14 inlet and C13 outlet connectors.
	IMS AC Current Sensor, up to 20 Amps, C19/C20 Product # IMS-4842 The IMS-4842 20A Current Sensor lets you monitor current consumption of a particular device or circuit anywhere within your infrastructure. It reports the actual current flow in the circuit, allowing you to know the current draw from devices such as server racks, UPS and generators. Any failed generator starts are reported to you immediately. The IMS-4842 can monitor current from 0-20 Amps over a voltage range from 0-250VAC 50/60Hz. The sensor comes with IEC320 C20 inlet and C19 outlet connectors.
	IMS Dry Contact Bridge Product # IMS-4850 The IMS-4850 Dry Contact Bridge allows you to connect a dry contact alarm from any device to your IMS. The Dry Contact Bridge is compatible with Normally Open and Normally Closed contacts. The electrical connection between the sensor and IMS is made via RJ-45 patch cable (not included). The sensor may be mounted either on a wall or rest on the floor. The Dry Contact Bridge connects to the IMS via a RJ-45 cable (e.g. CAT5 cable). The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the bridge to your structured wiring network via a RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS 4-20mA Bridge Product # IMS-4851 The 4-20mA Bridge allows you to connect a 4-20mA transducer to your Sensaphone IMS unit. The 4-20mA Bridge features optical isolation between the input and the IMS unit, which ensures troublefree operation and safety. The electrical connection between the bridge and IMS is made via RJ-45 patch cable (not included). The bridge may be mounted either on a wall or rest on the floor. The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the bridge may be installed in another room or another floor. Connect the bridge to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS Door Switch Product # IMS-4860 The IMS-4860 Door Switch with bridge enables your IMS unit to detect if any unauthorized entry or intrusion has occurred. The bridge may be mounted either on a wall or rest on the floor. The switch is mounted to doors or windows you wish to monitor. The electrical connection between the bridge and IMS unit is made via RJ-45 patch cable. The connection from the bridge to Host or Node can utilize your existing network wiring infrastructure. For example, the switch may be installed in another room or another floor. Connect the bridge to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.
	IMS Passive Infrared Motion Sensor Product # IMS-4861 The IMS-4861 Passive Infrared Detection Sensor is a dual-element passive infrared intrusion detector for use in electronic security systems. It reduces FALSE alarms by eliminating background noises and nuisance stimuli. The IMS-4861 employs variable pulse-count adjustment, thus making it adaptable for use both inside and outside of server/equipment rooms. It is designed to connect to the IMS Host or Node. The Passive Infrared Detection Sensor comes with an attached 7′ cable with an RJ-45 plug on the end. If the sensor is close to the IMS Host or Node, you can plug the sensor directly to an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length.
	IMS Smoke Detector Sensor Product # IMS-4862 The IMS-4862 Smoke Detector Sensor is designed to connect to the IMS Host or Node and monitor for smoke in indoor environments. The electrical connection between the sensor and IMS is made via the attached RJ-45 patch cable. The sensor may be secured to a wall or ceiling (hardware not included). If the sensor is close to the IMS Host or Node, you can plug the sensor directly to an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input.
	IMS Airflow Sensor Product # IMS-4863 The Airflow sensor is designed to monitor for the presence or absence of cool moving air. This is especially useful for monitoring air conditioning systems. The sensor can provide relative air flow as a percentage from 0 to 100. The sensor is compatible with both the IMS-1000 and IMS-4000 devices. The Airflow Sensor connects to the IMS via a RJ-45 cable (e.g. CAT5 cable). The connection from the sensor to the Host or Node can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the bridge to your structured wiring network via a RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.

IMS-1000 Single Room Monitoring Solution

Specifications

Name:	IMS-1000 Single Room Monitoring Solution
Product #:	IMS-1001 | IMS-1002
Environment Monitoring:	Servers don't operate properly unless they are in a proper environment. High temperatures increase the chance of a system crash. Power failure, water on the floor, smoke and fire obviously cause even more issues. Sensors are available for the IMS System to monitor all of the critical environmental conditions that are important for smooth operation of your computer equipment.
Physical Security:	There is a growing concern for physical security in the data center. Malicious activity, and even accidental activity make it necessary to watch over your computer room. Who was there after hours? Who opened the cabinet door just before the system crashed? The IMS System has the capability to supply this type of information. Security sensors can be configured to track all access activity in and around your data center and generate instant alarm notifications. Any monitored condition can even trigger an image capture from a camera which can be immediately e-mailed to the appropriate personnel.
IP Monitoring:	The IMS System provides integrated monitoring of network connectivity and server operation. A ping request can be sent periodically and an alarm is generated when there is no response. Even more detailed monitoring can be performed with the Port Service Response function. The IMS System can send specific requests to servers for SMTP, POP, HTTP, FTP, or any other port service for a proper response. You will know immediately when a service fails on any of your servers. And unlike other monitoring systems, a failure on your e-mail server won't prevent the alarm message from being delivered.
Alarm Notification:	When an alarm condition is detected, the notification process begins. Both the IMS-4000 and IMS-1000 systems can deliver alarm messages through the network as e-mails and SNMP traps. For additional convenience and redundancy, the IMS-4000 has a built in telephone interface and the IMS-1000 has an optional phone interface. Voice phone calls can be made with custom messages describing, in your own voice, where the problem occurred. Messages are sent continuously until someone responds.
History and Trends:	Full event-history and trending are provided with the Data Logging feature. User-selectable sampling lets you store critical temperature, humidity, or other environmental information about your infrastructure by the minute, hour or day.
	Use the data for graphing, database, or auditing purposes. Events are recorded for review: user access, alarm detection, dispatch, and alarm acknowledgement. The IMS systems provide you with everything you need for a reliable and consistent audit trail.
Enterprise Hardware Expansion:	No
Enterprise Software Console:	No
Power Failure Monitoring:	Yes
Built-In Battery Backup:	Yes
High Sound Level Alarm:	No
External Sensors:	Up to 8
Automatic Sensor Identification and Setup:	Yes
Sensor Supervision:	Yes
Cat5 Wiring for Sensor Extensions:	Yes
IP Monitoring:	16 Devices or Servers
Alarm Notification User Profiles:	16
E-mail Notification:	Yes
Pager Notification:	Yes
Voice Phone Call Notification:	Optional
Customizable Voice Messages:	Optional
Remote Listen-In Over Telephone:	No
SNMP Traps:	Yes
SNMP Manageable:	Yes
Built-In Web Server:	Yes
Cameras:	32 External
Camera Interface:	One at a time
Alarm Triggered Image Capture:	Yes
Scheduling for Alarms and Notification:	No
User Grouping For Alarm Types:	No
Outlet Control:	No
Built-In RAS Server:	No
Two-Way E-mail Command Responder:	No
Data Logging and Event Logging:	Yes
Software Pop-Up When Alarms Occur:	No

IMS-1000 Single Room Monitoring Solution

Support Documents/Downloads

	IMS-1000 Manual (pdf)
	IMS-1000 Firmware History & Installation Procedure (pdf)
	IMS Brochure (pdf)
	IMS-1000 Firmware Version 1.5.67.217 (gz)
	Sensaphone Locator Software (exe)
	IMS-1000 MIB (mib)

IMS-1000 Single Room Monitoring Solution

Video