Also included on the 2800 are four traditional, hard-wired sensor inputs. These are Sensaphone Universal Inputs that can be used with temperature sensors, dry contact sensors, and even 4-20mA transducers. So, when you have monitoring requirements near the 2800, just wire them in. When wiring is inconvenient or further away, just stick the wireless sensors where you need them. The wireless sensors will operate up to 300 feet line-of-site* away from the 2800. Not far enough? Just add a wireless repeater to go farther. The repeater can be located up to 4000 feet line-of-site* from the 2800. Then, one or more sensors can be located up to 300 feet line-of-site* from the repeater.

Notification

Just like the other Sensaphone products, the 2800 uses the reliability of a standard phone line to make phone calls to the appropriate personnel to announce alarm conditions. Each monitoring condition, both wired and wireless, can have a custom voice message attached to
it. Each message is recorded in your own voice for easy alarm identifi cation. Alarm notification will repeat out to eight people until acknowledged.

Applications

Use the 2800 to monitor multiple greenhouses without wires, multiple barns, coolers, freezers, or a wide
variety of remote equipment. The new Sensaphone 2800 can be used anywhere you would use our other
Sensaphone products. The 2800 just makes installa tion and expansion faster and easier. Extend your reach and monitor your critical remote locations with the new Sensaphone 2800.

• • Shipping Weight 
  • 8 lbs.
• • Batteries 
  • 3.4Ah sealed rechargeable battery (included)
• • Telephone Connection 
  • FCC approved RJ-11 plug-in modular connector with 6' cord
• • Operating Temperature Range 
  • Unit should be kept between 32° F and 120° F
• • Temperature Sensing Range 
  • –109º F to 115º Fwith remote temperature sensor
• •  
  • NRTL listed for compliance with U.L. Standard 60950-1