Quick View		(larger image)
Inputs:	Up to 30 Wireless Sensors - Dry Contact - Normally Open /Normally Closed, Temperature - 2.8K Thermistor, Water detection, Humidity, Power Failure, 4-20mA Current Loop, 12-Bit Resolution
Alarm Notifications:	8 Alarm escalation levels, E-Mail, Text Message, SNMP Trap, Comprehensive scheduling per input, user, and alarm destination
Special  Features:	Web Programmable
Part  Numbers:	Sensaphone WSG30 Wireless Sensor Gateway FGD-WSG30
	Sensaphone WSG30 Wireless Sensor Gateway with International Power Supply FGD-WSG30-INT
Sensaphone WSG30 Functional Diagram
(click for larger image)

Sensaphone WSG30 Wireless Sensor Gateway

Web Based Monitoring with Wireless Sensors

Introducing the new Sensaphone Wireless Sensor Gateway system. The WSG30 is a unique wireless sensor monitoring system that can be used in more than one way. As a standalone system, it can monitor a variety of conditions from the wireless sensors and directly notify the appropriate personnel by sending e-mails and text messages. The convenience of having wireless sensors allows you to move your sensors around while tracking down heat problems within a data center. The WSG30 is perfect for monitoring refrigerators and freezers for food and medical applications where running wires may be inconvenient or costly.

The WSG30 can also be used within an existing industrial automation system and communicate directly with existing HMI software using the Modbus protocol. Sensor and transducer values can be sent wirelessly to the WSG30 main unit and then directly into your automation software. In addition to supplying live wireless sensor information to your existing automation software, the WSG30 can still independently send e-mail and text message alarm notifications at the same time.

Up to 30 wireless sensors can be monitored by the WSG30 in addition to automatic power failure alarm detection and diagnostic alarms. All sensors are supervised with their battery level reported and monitored.

If any sensor has a low battery or drops offline, a diagnostic alarm is generated and users are contacted. A rechargeable battery backup is also built in.

Sensaphone WSG30 Wireless Sensor Gateway

Sensors

	WSG Wireless Temperature Sensor Product # FGD-WSG30-TMP The WSG Wireless Temperature sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and temperature element for monitoring temperature wherever the device is installed. You can remove the internal temperature element and attach a remote temperature probe so that measurements can be made in a refrigerator, freezer or other harsh environment. The sensor comes with two AA alkaline batteries which will power the sensor for up to two years. An optional plug-in power supply is also available in which case the batteries become a backup if main AC power fails.
	WSG Wireless Temperature Sensor with External Probe Product # FGD-WSG30-TEX The WSG Wireless Temperature sensor with External Probe is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and a remote temperature probe so that temperature measurements can be made in a refrigerator, freezer or other harsh environments. The sensor comes with two AA alkaline batteries which will power the sensor for up to two years. An optional plug-in power supply is also available in which case the batteries become a backup if main AC power fails.
	WSG Wireless Humidity Sensor Product # FGD-WSG30-HUM The WSG Wireless Humidity Sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and humidity sensor element for monitoring humidity wherever the device is installed. The sensor comes with two AA alkaline batteries which will power the sensor for up to two years. An optional plug-in power supply is also available. The batteries then become a backup if main AC power fails.
	WSG Wireless Spot Water Sensor Product # FGD-WSG30-SPOT The WSG30 Wireless Spot Water Detection Sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and water sensing probes for monitoring for the presence of water at a particular location. The sensor comes with three AA alkaline batteries which will power the sensor for up to two years.
	WSG Wireless Zone Water Detection Sensor Product # FGD-WSG30-ZONE The WSG30 Wireless Zone Water Detection Sensor is designed to work with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and ten feet of water sensing cable for monitoring for the presence of water in a particular area. The size of the monitored area can be extended by attaching additional lengths of WaterRope (FGD-0063) to the end of the included WaterRope. You can connect up to ten lengths of WaterRope (100′) to one Zone Water Detector. The sensor comes with three AA alkaline batteries which will power the sensor for up to two years.
	WSG Wireless Power Failure Sensor Product # FGD-WSG30-PWR The WSG Wireless Power Failure sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter, two AA alkaline batteries and a wall plug in power supply. The sensor will detect a loss of power at the outlet where the power supply is attached. The two AA alkaline batteries will power the sensor and allow it to transmit alarm information in the event that 120VAC power fails.
	WSG Wireless Dry Contact Sensor Product # FGD-WSG30-DRY The WSG Wireless Dry Contact sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter and input terminals for connecting to any normally-open or normally closed output. (Use of this device with solid-state outputs is not recommended.) The sensor comes with two AA alkaline batteries which will power the sensor for up to two years. An optional plug-in power supply is also available. The batteries then become a backup if main AC power fails.
	WSG Wireless 4-20mA Sensor Product # FGD-WSG30-4-20 The WSG30 Wireless 4-20mA sensor is designed to work exclusively with the Sensaphone WSG30. This sensor includes a built-in radio transmitter, 4-20mA input and a 24V loop power supply. The sensor can be used to monitor the output of any 4-20mA transducer. The sensor comes with a plug-in power supply and three AA alkaline batteries which will power the sensor for several hours if main AC power fails.

Sensaphone WSG30 Wireless Sensor Gateway

Specifications

Name:	Sensaphone WSG30 Wireless Sensor Gateway
Product #:	FGD-WSG30
Alarm Notification Methods:	E-Mail, Text Message, SNMP Trap
	8 Alarm escalation levels
	Comprehensive scheduling per input, user, and alarm destination
Destinations:	8 Programmable User Profiles
	4 programmable alarm destinations per profile
	Alarms can be assigned to specific User Profiles
Communication Types:	E-Mail – SMTP
	Text Messages
	Web page – Supported formats HTTP, PDA, WAP, and XML
	SNMP – MIB with Traps, GET, GETNEXT, and SET
	MODBUS®/TCP Slave Conformance Class 0 and 1
Sensors:	Up to 30 Wireless Sensors
	Dry Contact - Normally Open /Normally Closed
	Temperature - 2.8K Thermistor
	Water detection
	Humidity
	Power Failure
	4–20mA Current Loop
	12–Bit Resolution
Data Logging:	32,000 Samples (all samples include data date and time)
	1 second to 100 hours sampling rate, variable rate per sensor
	User programmable sensor selection
	Battery
	Power Supply
Communication Ports:	Ethernet 10/100Base–T
Local Indicators:	80 Character lighted LCD
	Ethernet link and Activity LEDs
Power Requirements:	External transformer 120VAC 60Hz input/9VDC Output
	Rechargeable Battery Backup (included)
Wireless Technology:	2.4GHz/ISM
Operating Conditions:	0-90% RH, non–condensing
	0–50°C (32–122°F)
Physical Properties:	7.6" x 5.1" x 2.0" (19.3cm x 13cm x 5cm)
	2.5 lbs (1.1kg)
Certification Standards:	FCC Part 15 – Class B Compliant

Sensaphone WSG30 Wireless Sensor Gateway

Support Documents/Downloads

	Sensaphone WSG30 Brochure (pdf)
	Sensaphone WSG30 User's Manual (pdf)
	Sensaphone WSG30 Firmware Revision History & Upgrade Instructions (pdf)
	Sensaphone WSG30 Firmware v1.56 (bin)
	Sensaphone WSG30 SNMP MIB (mib)
	Sensaphone Locator Software (exe)

Sensaphone WSG30 Wireless Sensor Gateway

Video