Features & Specifications
Features
ADVANCED CAPABILITIES
- Eight universal inputs, configurable as Normally Open, Normally Closed, Temperature, or 4-20mA.
- Easy-to-install with fully automatic input configuration. NO INPUT JUMPERS!
- Scaleable range on 4-20mA analog inputs
- Programmable recognition time for all inputs
- Internal sensor calibration for all inputs
- One output channel for manual or automatic control from alarms
- Two additional outputs for duplex pump control
- Built-in Pump Controller runs independently from alarm monitoring
- Control logic for Fill or Drain applications
- Pump control works with analog level sensor, or from float switches
- Eight phone numbers for alarm notification
- Custom voice messages for the ID and ALL monitored zones
- Text based alarm messages to alphanumeric pagers, and cell phones
- Dial out test function to simulate and verify alarm notification
- Individual user acknowledgement codes for tracking alarm activity
- Keypad and speaker for local programming
- LED status indicators for all inputs and outputs, Battery, Power, Phone, and Pump Control Mode
- Password protected keypad to restrict local programming access
- Detailed alarm history with optional 30-minute snapshot history of all zones
- Automatic Web status option, free for first year
- Detailed alarm history with optional hourly snapshot history of all zones
- High sound alarm with remote listen-in
- Packaged in a panel mount enclosure with built-in mounting tabs
- NEMA-4X enclosure optional
- Superior lightning protection
- Three year warranty
-
-
ENVIRONMENTAL INPUTS
-
-
- Number of Zones
- 8
-
- Zone Connector
- terminal block
-
- Zone Types
- N.O./N.C. contact, 2.8K and 10K thermistor (-20 to 150 deg F), and 4-20mA (-10,000 to 10,000)
-
- Zone characteristics
- 10K. to 5V (temperature/contact) or 237 Ohms to ground (4-20mA)
-
- A/D Converter Resolution
- 10 bits ±2 LSB
-
- Zone Protection
- Gas discharge tubes, PTC fuses, and fast acting diode clamps
-
-
MICROPHONE
-
-
- Internal
- for recording custom voice messages
-
- External(optional)
- For listening-in to on-site sounds and high sound level alarms
-
- Mic Connector
- terminal block
-
- Mic Type
- Electret Condenser
-
- Mic Impedance
- 2.2K
-
-
PHONE INTERFACE
-
-
- Terminals
- connection to a two-wire analog telephone line
-
- (8) Zone Alarms, Sound, Power, Battery OK, Phone in Use, Output On, and System On
-
-
LED INDICATORS
-
-
-
PUMP CONTROL INPUTS
-
-
- Level Sensor
- Optically isolated 4–20mA input for connecting to a well-level transducer.
-
- Float Inputs (3)
- Optically isolated dry contact inputs for connecting to float switches
-
-
RELAY OUTPUT
-
-
- 2A 120VAC/2A 24VDC:
- Programmable for duplex alternating pump control in Fill or Drain mode
-
-
PUMP OUTPUTS (2)
-
-
-
POWER SUPPLY
-
-
- Power Supply
- 120VAC/12VAC 60Hz 10W wall plug-in transformer
-
- Power Consumption
- 5 Watts
-
- Power Protection
- Metal Oxide Varistor
-
- Battery Backup
- 12V rechargeable (optional)
-
- 24V Output
- 24VDC 40mA max.
-
-
ENVIRONMENTAL
-
-
- Operating Temperature
- 32-122 deg F (0-50 deg C)
-
- Operating Humidity
- 0-90% RH non-condensing
-
- Storage Temperature
- 32-140 deg F
-
-
PHYSICAL
-
-
- Dimensions
- 10.5"h x 8.3"w x 1.8"d
-
- Weight
- 3.5 lbs
-
- Enclosure
- Aluminum housing with integral mounting flanges for wall or panel installation.