{"title":"Temperature Sensors","description":"","products":[{"product_id":"28k-type-room-temperature-sensor","title":"2.8k Type Room Temperature Sensor","description":"\u003ch3\u003eEasy temperature monitoring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from 0° to 120°F | -17° to 49°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eRequires additional accessory wire to connect Sensaphone\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eFor use in clean, indoor environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Room Temperature Sensor can be used with most Sensaphone models to measure the temperature in a clean dry environment. The Sensaphone will trigger an alarm when the temperature falls outside of the programmed high or low temperature limit. The sensor is mounted on a flat surface anywhere ambient air temperatures need to be measured and connects to the Sensaphone with optional accessory wire.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis model is recommended to be located in clean, dry environment. For outdoor use model FGD-0101 is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"vouter\"\u003e\n\u003cdiv class=\"vcenter col-1\"\u003e\n\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e 0° to 120°F | -17° to 49°C\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vouter\"\u003e\n\u003cdiv class=\"vcenter col-1\"\u003e\n\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vouter\"\u003e\n\u003cdiv class=\"vcenter col-1\"\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vouter\"\u003e\n\u003cdiv class=\"vcenter col-1\"\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.5 x .75 x .75 | 35 x 19 x 19mm\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vouter\"\u003e\n\u003cdiv class=\"vcenter col-1\"\u003e\n\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 2.8K Series\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vouter\"\u003e\n\u003cdiv class=\"vcenter col-1\"\u003e\n\u003cstrong\u003eNotes:\u003c\/strong\u003e Not for outdoor use\u003c\/div\u003e\n\u003cdiv class=\"vcenter col-1\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"vcenter col-1\"\u003eDownloads\u003c\/h3\u003e\n\u003cdiv class=\"vcenter col-1\"\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0100_CS.pdf\"\u003e2.8k Type Room Temperature Sensor Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0037%20instructions.pdf\"\u003e2.8k Type Room Temperature Sensor Instructions\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sensaphone","offers":[{"title":"Default Title","offer_id":51959980884279,"sku":"FGD-0100","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0100_Left_WEB__61020.jpg?v=1776160235"},{"product_id":"28k-type-weatherproof-temperature-sensor","title":"2.8K Type Weatherproof Temperature Sensor","description":"\u003ch3\u003eWeatherproof temperature monitoring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from -20° to 176°F | -28° to 80°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± 1°F |  ± .56°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eIncludes 12’ of wire and mounting clip\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eSuitable for use in wet or dirty environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Weatherproof Temperature Sensor can be used with all Sensaphone models to measure the temperature in a wet or dirty environment. The Sensaphone will trigger an alarm when the temperature falls outside of the programmed high or low temperature limit. The sensor can be anchored in place using the included mounting clip. The sensor is ideal for cold storage applications such as refrigerators or freezers, agricultural applications such as greenhouses or anywhere a temperature measurement is required away from the Sensaphone. The included 12 feet of wire can be extended up to 1,000’ with optional accessory wire.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eAn optional NIST traceable certificate is available.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -20° to 176°F | -28° to 80°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12' of wire | 3.5m\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 2.8K Series\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Available with NIST Certification\u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0101_CS.pdf\"\u003e2.8K Type Weatherproof Temperature Sensor Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0055%202.8K%20instructions.pdf\"\u003e2.8K Type Weatherproof Temperature Sensor Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"NIST Certification","offer_id":51959981244727,"sku":"FGD-0101-NIST","price":130.0,"currency_code":"USD","in_stock":true},{"title":"None","offer_id":51959981277495,"sku":"FGD-0101","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0101_WEB__59707.jpg?v=1776160247"},{"product_id":"contact-type-temp-alert-temperature-switch","title":"Contact Type Temp Alert Temperature Switch","description":"\u003ch3\u003eMonitor air temperature from 20° to 110°F | 6.7° to 43.3°C\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMonitors temperatures from 20° to 110°F | 6.7° to 43.3°C\u003c\/li\u003e\n\u003cli\u003eSends a simple alarm or no alarm status to the Sensaphone\u003c\/li\u003e\n\u003cli\u003eProvides a local display of temperature reading\u003c\/li\u003e\n\u003cli\u003eMultiple sensors can be added to one Sensaphone input\u003c\/li\u003e\n\u003cli\u003eSeparate output for high and low alarm signals\u003c\/li\u003e\n\u003cli\u003eNo power required to operate\u003c\/li\u003e\n\u003cli\u003e1 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Temp Alert Temperature Switch can be used with all Sensaphone models. It monitors air temperature from 20° to 110°F | 6.7° to 43.3°C. By adjusting the temperature limit arms, you can select the acceptable temperature limits for your application. Simply use a screwdriver to set the temperature limit arms on the rear of the device.\u003c\/p\u003e\n\u003cp\u003eWhen the ambient air temperature rises or falls to the limit arms, the temperature sensor triggers an alarm. The temperature alert can be mounted to any wall or vertical surface. Multiple temp alerts may be wired in parallel to a single input. It requires no power for operation and mounts easily on any flat surface.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e Alarm Use: 20° to 110°F (6.7° to 43.3°C) | Display use: 0° to 120°F (-17.8° to 48.9°C) \u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 3°F | 1.7°C \u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.5 x 3.25 x 1\" | 11.4 x 8.3 x 2.5cm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e Contact Series\u003cbr\u003e\u003cstrong\u003eTemp Response Time:\u003c\/strong\u003e TC = 14 minutes\u003cbr\u003e\u003cstrong\u003eMinimum Temp Span:\u003c\/strong\u003e 10 Recommended distance between high and low set points\u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0022_CS.pdf\"\u003eContact Type Temp Alert Temperature Switch Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0096_TempAlert_Instructions.pdf\"\u003eContact Type Temp Alert Temperature Switch Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Default Title","offer_id":51959986028855,"sku":"FGD-0022","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0022_Right__72023.jpg?v=1776160426"},{"product_id":"28k-type-ultra-low-temperature-sensor","title":"2.8K Type Ultra Low Temperature Sensor","description":"\u003ch3\u003eMonitor temperatures as low as -85°C\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from -121° to 115°F | -85° to 80°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± 1°F |\u003cspan\u003e  \u003c\/span\u003e± .56°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eIncludes 12’ of wire and mounting clip\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eSuitable for use in ultra low freezers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Ultra Low Temperature Sensor can be used with most Sensaphone models to measure the temperature in an extremely cold environment. The Sensaphone will trigger an alarm when the temperature falls outside of the programmed high or low temperature limit. The sensor’s coated wire prevents cracking and allows it to be placed inside of freezers that go as low as -85°C. The sensor is ideal for medical or research cold storage freezers that keep a constant temperature below the limits of other Sensaphone temperature sensors. The included 12 feet of coated wire can be extended with optional accessory wire.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eAn optional NIST traceable certificate is available.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -121° to 176°F | -85° to 80°C\u003cbr\u003e\u003cstrong\u003eAccuracy\u003c\/strong\u003e: 1°F | .56°C \u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12' of wire | 3.5m\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 2.8k Series\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Available with NIST Certification\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0101_TEF_CS.pdf\"\u003e2.8K Type Ultra Low Temperature Sensor Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0174%202.8K-TEF%20instructions.pdf\"\u003e2.8K Type Ultra Low Temperature Sensor Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"None","offer_id":51959991763255,"sku":"FGD-0101-TEF","price":50.0,"currency_code":"USD","in_stock":true},{"title":"NIST","offer_id":51959991796023,"sku":"FGD-0101-TEFNIST","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0101-TEF_WEB__02984.jpg?v=1776160597"},{"product_id":"10k-type-weatherproof-temperature-sensor","title":"10K Type Weatherproof Temperature Sensor","description":"\u003ch3\u003eWeatherproof temperature monitoring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures temperature from -20° to 176°F | -28° to 80°C\u003c\/li\u003e\n\u003cli\u003eSuitable for use in humid, wet or dirty environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eThis sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments. Available with NIST Certification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -20° to 176°F | -28° to 80°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12' of wire | 3.5m\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 10k Series\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0102_CS.pdf\"\u003e10K Type Weatherproof Temperature Sensor Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0056%2010K%20instructions.pdf\"\u003e10K Type Weatherproof Temperature Sensor Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"None","offer_id":51959991927095,"sku":"FGD-0102","price":30.0,"currency_code":"USD","in_stock":true},{"title":"NIST Certification","offer_id":51959991959863,"sku":"FGD-0102-NIST","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0102__74193.jpg?v=1776160602"},{"product_id":"10k-type-indoor-decorator-zone-temperature-sensor","title":"10K Type Indoor Decorator Zone Temperature Sensor","description":"\u003ch3\u003eTemperature monitoring where appearance is important\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from 35° to 140°F | 2° to 60°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± .36°F |\u003cspan\u003e  \u003c\/span\u003e± .2°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eIncludes wall mounting hardware\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eRequires additional accessory wire to connect Sensaphone\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eFor use in clean, indoor environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Indoor Decorator Zone Temperature Sensor can be used with most Sensaphone models to measure the ambient room temperature. When the temperature falls outside of the Sensaphone’s programmed high or low limit, the user will receive an alarm which displays or reads the current temperature. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate. The sensor is designed to be wall–mounted indoors where appearance is important and connects to the Sensaphone with optional accessory wire.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e 35° to 140°F | 2° to 60°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e .36°F | .2°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.5 x 3.3 x 1.3\" | 114 x 83 x 32mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 10k Series\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0103_CS.pdf\"\u003e10K Type Indoor Decorator Zone Temperature Sensor Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0202%2010K%20instructions.pdf\"\u003e10K Type Indoor Decorator Zone Temperature Sensor Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Default Title","offer_id":51959992090935,"sku":"FGD-0103","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0103_Decorator_Left_WEB__48223.jpg?v=1776160608"},{"product_id":"10k-type-outdoor-air-temperature-sensor","title":"10K Type Outdoor Air Temperature Sensor","description":"\u003ch3\u003eMinimize radiant energy effects\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from -30° to 140°F | -34° to 60°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± .36°F |\u003cspan\u003e  \u003c\/span\u003e± .2°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eIncludes mounting hardware\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003ePVC shield minimizes radiant energy effects on temperature readings\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eSuitable for use in outdoor environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Outdoor Weatherproof Temperature Sensor can be used with most Sensaphone models to measure the ambient air temperature without the effects of being in direct sunlight. When the temperature falls outside of the Sensaphone’s programmed high or low limit, the user will receive an alarm which displays or reads the current temperature. The temperature sensor is mounted inside a ventilated, treated weather–resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy installation. The sensor connects to the Sensaphone with the included 8’ of wire and can be extended using optional accessory wire.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -30° to 140°F | -34° to 60°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e .36°F | .2°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e PVC Shield, Weatherproof Metal Outlet Box\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 9 x 3 x 2\" | 228 x 76 x 51mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 10k Series\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0104_CS.pdf\"\u003e\u003cspan\u003e10K Type Outdoor Air Temperature Sensor Sales Brochure\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Default Title","offer_id":51959992156471,"sku":"FGD-0104","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0104_Temp_Left_WEB__73529.jpg?v=1776160614"},{"product_id":"10k-type-immersion-temperature-sensor","title":"10K Type Immersion Temperature Sensor","description":"\u003ch3\u003eFluid temperature monitoring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from 40° to 221°F | -34° to 60°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± .36°F |\u003cspan\u003e  \u003c\/span\u003e± .2°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature of fluid inside a pipe\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Immersion Temperature Sensor can be used with most Sensaphone models to measure the temperature of fluids inside a pipe. When the temperature falls outside of the Sensaphone’s programmed high or low limit, the user will receive an alarm which displays or reads the current temperature. It’s constructed of brass WEL-B thermowell which screws into a customer-supplied 0.5” NPT saddle or Thredolet® fitting in a pipe. It fits into a thermowell via a brass 0.125” NPT fitting. The sensor connects to the Sensaphone with the attached 8’ of wire and can be extended using optional accessory wire.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range\u003c\/strong\u003e: -40° to 221°F | -40° to 105°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e .36°F | .2°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Brass\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Thermowell: 5.2\" | 130mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 10k Series\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0105_CS.pdf\"\u003e10K Type Immersion Temperature Sensor Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0105%20Instructions_WEB.pdf\"\u003e10K Type Immersion Temperature Sensor Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Default Title","offer_id":51959992320311,"sku":"FGD-0105","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0105_Center_WEB__09084.jpg?v=1776160620"},{"product_id":"28k-type-temperature-sensor-in-glass-bead-vial","title":"2.8K Type Temperature Sensor in Glass Bead Vial","description":"\u003ch3\u003eBuffer momentary temperature fluctuations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from -20° to 115°F | -28° to 46°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± 1°F |\u003cspan\u003e  \u003c\/span\u003e± .56°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eGlass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eIncludes 12’ of wire\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eSuitable for use in wet or dirty environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eThe Temperature Sensor in Glass Bead Vial can be used with most Sensaphone models to measure the temperature of objects in a refrigerator or freezer. By placing the sensor in a bottle filled with glass beads users will receive a reading that represents the temperature of the refrigerator’s contents rather than the ambient air temperature. The Sensaphone will trigger an alarm when the temperature falls outside of the programmed high or low temperature limit. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eThe glass bead filled vial will also buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm. The included 12 feet of wire can be extended with optional accessory wire.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -20° to 176°F | -28° to 80°C \u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C \u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e HDPE Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.8 x 1.6\" | 72mm x 40mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 2.8K Series\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Available with NIST Certification\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0107_CS.pdf\"\u003e2.8K Type Temperature Sensor in Glass Bead Vial Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0218_BufferedTempInstructions.pdf\"\u003e2.8K Type Temperature Sensor in Glass Bead Vial Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"NIST Certification","offer_id":51959992549687,"sku":"FGD-0107-NIST","price":155.0,"currency_code":"USD","in_stock":true},{"title":"None","offer_id":51959992582455,"sku":"FGD-0107","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0107__49786.jpg?v=1776160625"},{"product_id":"28k-type-ultra-low-temperature-sensor-in-glass-bead-vial","title":"2.8K Type Ultra Low Temperature Sensor in Glass Bead Vial","description":"\u003ch3\u003eBuffer momentary temperature fluctuations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from -121° to 176°F | -85° to 80°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± 1°F |\u003cspan\u003e  \u003c\/span\u003e± .56°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eGlass bead filled vial provides representation of temperature of freezers contents\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHelps to buffer any momentary fluctuations that may cause a preliminary alarm\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eIncludes 12’ of wire\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eSuitable for use in wet or dirty environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Ultra Low Temperature Sensor in Glass Bead Vial can be used with all Sensaphone models to measure the temperature of objects in a freezer. By placing the sensor in a bottle filled with glass beads users will receive a reading that represents the temperature of the freezer’s contents rather than the ambient air temperature. The Sensaphone will trigger an alarm when the temperature falls outside of the programmed high or low temperature limit. The sensor’s coated wire prevents cracking and allows it to be placed inside of freezers that go as low as -85°C. The glass bead filled vial will also buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm. The included 12 feet of coated wire can be extended with optional accessory wire.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eAn optional NIST traceable certificate is available.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -121° to 176°F | -85° to 80°C \u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C \u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e 30mL HDPE Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.34 x 2.48\" | 34mm x 63mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 2.8K\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Available with NIST Certification\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0107_TEF_CS.pdf\"\u003e2.8K Type Ultra Low Temperature Sensor in Glass Bead Vial Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0218_BufferedTempInstructions.pdf\"\u003e2.8K Type Ultra Low Temperature Sensor in Glass Bead Vial Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"NIST Calibration","offer_id":51959992877367,"sku":"FGD-0107-TEFNIST","price":175.0,"currency_code":"USD","in_stock":true},{"title":"None","offer_id":51959992910135,"sku":"FGD-0107-TEF","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0107-TEF__57775.jpg?v=1776160630"},{"product_id":"modbus-type-temperature-and-humidity-combination-sensor","title":"Modbus Type Temperature and Humidity Combination Sensor","description":"\u003ch3\u003eMonitor Temperature and Humidity from one point\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle point solution for monitoring indoor air temperature and humidity\u003c\/li\u003e\n\u003cli\u003eMeasures temperature from 32° to 122°F | 0° to 50°C\u003c\/li\u003e\n\u003cli\u003eTemperature accurate: ± .4°F |  ± .2°C\u003c\/li\u003e\n\u003cli\u003eMeasures humidity from 0-100% RH, non condensing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eThis combination temperature and humidity sensor is used exclusively with Sensaphone \u003c\/span\u003eSentinel Pro and Stratus EMS\u003cspan\u003e models to measure the temperature and humidity in a clean, dry environment. The Sensaphone will trigger an alarm when the temperature or humidity falls outside of the programmed high or low limit. It features include a back-lit LCD and user menu for easy installation. The slim enclosure allows the sensor to be mounted in in a single gang electrical box or directly to the wall. A 24V DC power supply is required to power the sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range\u003c\/strong\u003e: 32° to 122°F | -0° to 50°C\u003cbr\u003e\u003cstrong\u003eTemperature Accuracy:\u003c\/strong\u003e .4°F | .2°C\u003cbr\u003e\u003cstrong\u003eHumidity Range:\u003c\/strong\u003e 0-100% RH, non-condensing\u003cbr\u003e\u003cstrong\u003eHumidity Accuracy:\u003c\/strong\u003e 2% RH\u003cbr\u003e\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 20-28 VAC\/DC (non-isolated half-wave rectified)\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.3 x 4.7 x 1.15\" | 84 x 119 x 29mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e Modbus Series - 2 wire RS-485\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0110_CS.pdf\"\u003eModbus Type Temperature and Humidity Combination Sensor Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0205_Temp-Hum_Instructions.pdf\"\u003eModbus Type Temperature and Humidity Combination Sensor Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Default Title","offer_id":51959993073975,"sku":"FGD-0110","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0110_Left_WEB__11957.jpg?v=1776160636"},{"product_id":"temperature-humidity-and-co2-combination-sensor","title":"Temperature, Humidity and CO2 Combination Sensor","description":"\u003ch3\u003eMonitor Temperature, Humidity and C02 with One Sensor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA highly accurate and reliable dual-channel, non-dispersive infrared (NDIR) sensor to monitor CO2\u003c\/li\u003e\n\u003cli\u003eA precision thermistor to monitor temperature\u003c\/li\u003e\n\u003cli\u003eA thermoset polymer based capacitance sensor to measure humidity levels\u003c\/li\u003e\n\u003cli\u003eLCD for configuration and monitoring\u003c\/li\u003e\n\u003cli\u003eField replaceable sensors\u003c\/li\u003e\n\u003cli\u003eChoose between Modbus or 4-20mA compatible sensor\u003c\/li\u003e\n\u003cli\u003eMultiple Modbus sensors can be ran in parallel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Sensaphone Combination Temperature, Humidity and CO2 Sensor will measure and provide real time values to any Sensaphone that accepts a 4-20mA or Modbus signal. When any of the monitored conditions fall outside of the Sensaphone’s programmed high or low limits, the user will receive an alarm which displays or reads the current value. The sensor utilizes a highly accurate and reliable dual-channel, non-dispersive infrared (NDIR) sensor to monitor CO2, a precision thermistor to monitor temperature and a thermoset polymer based capacitance sensor to measure humidity levels. All sensors are encapsulated in filtered sensor pods that are field replaceable. Features include an LCD for configuration and visual indication, various output signal types, optional relays for alarm indication. An IP65 rated enclosure that can be either wall mounted on suspend from the ceiling is provided to protect against moisture penetration.\u003c\/p\u003e\n\u003cp\u003e A 24V DC power supply is required to power the sensor. \u003c\/p\u003e\n\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications:\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e 32° to 122°F | 0° to 50°C\u003cbr\u003e\u003cstrong\u003eTemperature Accuracy:\u003c\/strong\u003e .4°F | .2°C\u003cbr\u003e\u003cstrong\u003eHumidity Range:\u003c\/strong\u003e 0 to 100%RH\u003cbr\u003e\u003cstrong\u003eHumidity Accuracy:\u003c\/strong\u003e 2%RH\u003cbr\u003e\u003cstrong\u003eC02 Range:\u003c\/strong\u003e 0 to 2,000PPM\u003cbr\u003e\u003cstrong\u003eC02 Accuracy\u003c\/strong\u003e: 50PPM + 3% of reading\u003cbr\u003e\u003cstrong\u003eLCD Size:\u003c\/strong\u003e 1.4 x 0.6\" | 35mm x 15mm\u003cbr\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e IP65 NEMA 4X rated\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5.1 x 5.1 x 9\" | 130mm x 130mm x 75mm\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Available as 4-20mA or Modbus output signal\u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0111_CS.pdf\"\u003eTemperature, Humidity and CO2 Combination Sensor Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0217_MB_TempHumCO2.pdf\"\u003eTemperature, Humidity and CO2 Combination Sensor Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Modbus","offer_id":51959993270583,"sku":"FGD-0111-M","price":599.0,"currency_code":"USD","in_stock":true},{"title":"4-20mA","offer_id":51959993303351,"sku":"FGD-0111","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0111_Left_copy__05364.jpg?v=1776160645"},{"product_id":"28k-type-temperature-sensor-display","title":"2.8K Type Temperature Sensor Display","description":"\u003ch3\u003eAdd a local display to any 2.8k Type Temperature Sensor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnects to any Sensaphone 2.8k type temperature sensor to provide a local temperature reading\u003c\/li\u003e\n\u003cli\u003eBattery powered for up to one year\u003c\/li\u003e\n\u003cli\u003eLogs and displays high and low temperature\u003c\/li\u003e\n\u003cli\u003eAudible alarm\u003c\/li\u003e\n\u003cli\u003eRelay output can be programmed to turn on light or siren\u003c\/li\u003e\n\u003cli\u003eOptional power supply available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Local Temperature Display can be used with all Sensaphone 2.8k type temperature sensors. This provides an at-a-glance reading of the current temperature as well as the minimum and maximum temperatures. The display is ideal for any location where onsite staff need a quick, convenient visual reading of the sensor, saving them the time of checking the monitoring system's data.\u003c\/p\u003e\n\u003cp\u003eThe Local Temperature Display also:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLogs and displays the highest and lowest temperatures\u003c\/li\u003e\n\u003cli\u003eProvides an audible alarm for out-of-range temperatures\u003c\/li\u003e\n\u003cli\u003eOffers a relay output that can be programmed to turn on a light or siren for additional onsite alarm notifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen the temperature falls out of the programmed high and low limits, the display triggers an audible alarm, immediately alerting onsite staff of a potential problem. This alarm is in addition to the alerts that the Sensaphone monitoring system sends to designated personnel when temperatures fall out of range.\u003c\/p\u003e\n\u003cp\u003eThe \u003cspan\u003etemperature\u003c\/span\u003e sensor display is easy to program by using the four buttons on the front. It connects to the sensor and to most Sensaphone monitoring devices via screw terminals on the bottom. The display comes with a battery that powers it for up to one year, but you can also use an optional external power supply.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.25 x 4.25 x 0.82\" | 8.25 x 10.8 x 2 cm\u003cbr\u003e\u003cstrong\u003eTemperature Monitoring Range:\u003c\/strong\u003e -85° to 50°C | -121° to 122°F\u003cbr\u003e\u003cstrong\u003eTemperature Probe:\u003c\/strong\u003e 2.8K Thermistor\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25lb | 114gm\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e +\/- 1°F | 0.5°C\u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 12VDC (optional, part # XFR-0037)\u003cbr\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e (2) CR2450 lithium coin cells (included)\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS plastic\u003cbr\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e 3M Dual Lock Reclosable Fasteners\u003cbr\u003e\u003cstrong\u003eDisplay Size:\u003c\/strong\u003e 1.4 x 2.0\" LCD\u003cbr\u003e\u003cstrong\u003eAlarm Output:\u003c\/strong\u003e Solid state alarm output (Open Drain) rated 12VDC 0.1A\u003cbr\u003e\u003cstrong\u003eSensaphone Output:\u003c\/strong\u003e Current regulated output that simulates a 2.8K thermistor. For connecting to any Sensaphone that accepts 2.8K thermistors.\u003cbr\u003e\u003cstrong\u003eRelay Output:\u003c\/strong\u003e 12VDC 250mA\u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0120_CS.pdf\"\u003e2.8K Type Temperature Sensor Display Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0207_TemperatureDisplay_Instructions.pdf\"\u003e2.8K Type Temperature Sensor Display Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Default Title","offer_id":51959993467191,"sku":"FGD-0120","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0120-Left_WEB__50312.jpg?v=1776160655"},{"product_id":"28k-type-temperature-sensor-in-glycol-vial","title":"2.8k Type Temperature Sensor in Glycol Vial","description":"\u003ch3\u003eBuffer momentary temperature fluctuations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures temperature from -20° to 176°F | -28° to 80°C\u003c\/li\u003e\n\u003cli\u003eAccurate to ± 1°F |  ± .56°C\u003c\/li\u003e\n\u003cli\u003eGlycol filled vial will buffer any momentary fluctuations that may cause a preliminary alarm\u003c\/li\u003e\n\u003cli\u003eIncludes 12’ of wire\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eThe Temperature Sensor in Glycol Vial can be used with most Sensaphone models to measure the temperature of objects in a refrigerator or freezer. By placing the sensor in a bottle filled with glycol, users will receive a reading that represents the temperature of the refrigerator’s contents rather than the ambient air temperature. The Sensaphone will trigger an alarm when the temperature falls outside of the programmed high or low temperature limit. The glycol filled vial will also buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, the opening of doors, and fans circulating air. The glycol will slow the response time of the sensor, allowing normal daily operations to occur without having an alarm. The included 12 feet of wire can be extended with optional accessory wire.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eTechnical Specifications:\u003cbr\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -20° to 176°F | -28° to 80°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e HDPE Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.8 x 1.6\" | 72mm x 40mm  \u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 2.8k\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Available with NIST Certification\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0127-TEF_CS.pdf\"\u003e2.8k Type Temperature Sensor in Glycol Vial Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0218_BufferedTempInstructions.pdf\"\u003e2.8k Type Temperature Sensor in Glycol Vial Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"None","offer_id":51959993598263,"sku":"FGD-0127","price":55.0,"currency_code":"USD","in_stock":true},{"title":"NIST Certification","offer_id":51959993631031,"sku":"FGD-0127-NIST","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0127__95642.jpg?v=1776160660"},{"product_id":"28k-type-ultra-low-temperature-sensor-in-glycol-bottle","title":"2.8K Type Ultra Low Temperature Sensor in Glycol Bottle","description":"\u003ch3\u003eBuffer momentary temperature fluctuations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapable of measuring temperatures from -58° to 176°F | -50° to 80°C\u003c\/li\u003e\n\u003cli\u003eGlycol bottle buffers temperature during defrost cycles or when refrigerator\/freezer doors are opened for a short period of time\u003c\/li\u003e\n\u003cli\u003eAccurate to ± 1°F |  ± .56°C\u003c\/li\u003e\n\u003cli\u003eIncludes 12’ of wire \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Low Temperature Sensor in Glycol Vial can be used with most Sensaphone models to measure the temperature of objects in a freezer. By placing the sensor in a bottle filled with glycol users will receive a reading that represents the temperature of the freezer’s contents rather than the ambient air temperature. The Sensaphone will trigger an alarm when the temperature falls outside of the programmed high or low temperature limit. The glycol filled vial will also buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glycol will slow the response time of the sensor allowing normal daily operations to occur without having an alarm. The included 12 feet of wire can be extended with optional accessory wire. Please note that if this sensor is used in a ultra low freezer (-80°C) the glycol will freeze and severely delay response time.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -58° to 176°F | -50° to 80°C \u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e HDPE Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.8 x 1.6\" | 72mm x 40mm  \u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 2.8k\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Available with NIST Certification\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0127-TEF_CS.pdf\"\u003e2.8K Type Ultra Low Temperature Sensor in Glycol Bottle Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0218_BufferedTempInstructions.pdf\"\u003e2.8K Type Ultra Low Temperature Sensor in Glycol Bottle Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"No Certification","offer_id":51959993794871,"sku":"FGD-0127-TEF","price":75.0,"currency_code":"USD","in_stock":true},{"title":"NIST Certification","offer_id":51959993827639,"sku":"FGD-0127-TEF-NIST","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0127-TEF__54780.jpg?v=1776160665"},{"product_id":"rtd-probe-with-4-20ma-transmitter","title":"RTD Probe with 4-20mA Transmitter","description":"\u003ch3\u003eMeasure extreme temperatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUsed to monitor temperatures as low as -200°C.\u003c\/li\u003e\n\u003cli\u003eCan be custom calibrated to temperatures between -200° to 204°C\u003c\/li\u003e\n\u003cli\u003eTwo temperature probe options available; 14\" or 2\"\u003c\/li\u003e\n\u003cli\u003eRequires 24VDC power supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eThe RTD probe with 4-20mA transmitter can be used to measure the temperature in extreme  environments. The standard transmitter is calibrated to operate over the range  -200° to 35°C, but can be customized at time of order to operate over any range between -200° and 204°C. Two temperature sensing probes are available. The 14\" probe is useful for applications such as monitoring liquid nitrogen, where the sensor cabling cannot be exposed to the cold atmosphere. The sensor will need a 24VDC power supply to operate \u003c\/span\u003e(Part # FGD-0070).\u003c\/p\u003e\n\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -328° to 399°F | -200° and 204°C. Custom temperature ranges can be specified at time of order\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Hardwired\u003cbr\u003e\u003cstrong\u003eRTD Element:\u003c\/strong\u003e PT100 - 385ALPHA - CLASS B\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1 stainless steel RTD probe with 10 cable\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e 4-20mA\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Element Tolerance to IEC 60751 edition 2.0, par 5.1.2 \u003cbr\u003eRequires a 24VDC power supply FGD-0070\u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0240_CS.pdf\"\u003e2\" RTD Probe with 4-20mA Transmitter Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0240-14_CS.pdf\"\u003e14\" RTD Probe with 4-20mA Transmitter Sales Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0240%20Wiring%20Diagram.pdf\"\u003eRTD Probe with 4-20mA Transmitter Wiring Diagram\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Factory Temperature Range (-200° to 35°C) \/ 2\" Temperature Probe","offer_id":51959995269431,"sku":"FGD-0240","price":285.0,"currency_code":"USD","in_stock":true},{"title":"Factory Temperature Range (-200° to 35°C) \/ 14\" Temperature Probe","offer_id":51959995302199,"sku":"FGD-0240-14","price":285.0,"currency_code":"USD","in_stock":true},{"title":"Custom Temperature Range (-200° to 200°C) \/ 2\" Temperature Probe","offer_id":51959995334967,"sku":"FGD-0240-SPEC","price":310.0,"currency_code":"USD","in_stock":true},{"title":"Custom Temperature Range (-200° to 200°C) \/ 14\" Temperature Probe","offer_id":51959995367735,"sku":"FGD-0240-14SPEC","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0240__88813.jpg?v=1776160711"},{"product_id":"vfc-refrigerator-temperature-sensor-with-display","title":"VFC Refrigerator Temperature Sensor with Display","description":"\u003ch3\u003eVFC Refrigerator Temperature Sensor with Display\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContinually monitors temperatures\u003c\/li\u003e\n\u003cli\u003eClearly displays the temperature \u003c\/li\u003e\n\u003cli\u003eDisplays high and low temperatures\u003c\/li\u003e\n\u003cli\u003eProvides an audible alarm for out-of-range temperatures\u003c\/li\u003e\n\u003cli\u003eCan be programmed to turn on a light or siren for additional onsite alarm notifications\u003c\/li\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Temperature Sensor Display helps meet compliance when monitoring vaccines for the CDC’s Vaccines For Children (VFC) program. From the factory, the display comes with a NIST certified temperature probe in a glass bead buffered bottle for installation inside of the refrigerator. The display is mounted to the outside of the refrigerator and then connected to a Sensaphone system that is capable of data logging.\u003c\/p\u003e\n\u003cp\u003eUsers can read the refrigerator’s temperature on a 2” LCD display while the device passes the data along to the Sensaphone. Data can be viewed remotely, data logged, and monitored for high and low-temperature alarms.\u003c\/p\u003e\n\u003cp\u003eThe Local Temperature Display also:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplays the highest and lowest temperatures\u003c\/li\u003e\n\u003cli\u003eProvides an audible alarm for out-of-range temperatures\u003c\/li\u003e\n\u003cli\u003eCan turn on a light or siren for additional onsite alarm notifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen the temperature falls out of the programmed high and low limits, the display triggers an audible alarm, immediately alerting onsite staff of a potential problem. This alarm is in addition to the alerts that the Sensaphone monitoring system sends to designated personnel when temperatures fall out of range.\u003c\/p\u003e\n\u003cp\u003eThe display comes with a plug-in power supply and a battery that powers the device in the event of a power failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eItem includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature display\u003c\/li\u003e\n\u003cli\u003eTemperature probe with 12’ of wire\u003c\/li\u003e\n\u003cli\u003eBuffering bottle filled with glycol or glass beads\u003c\/li\u003e\n\u003cli\u003eNIST calibration certificate\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003eCoin cell batteries\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.25 x 4.25 x 0.82\" | 8.25 x 10.8 x 2 cm \u003cbr\u003e\u003cstrong\u003eTemperature Probe:\u003c\/strong\u003e 2.8K Thermistor \u003cbr\u003e\u003cstrong\u003eTemperature Monitoring Range:\u003c\/strong\u003e \u003cbr\u003eGlycol: -50° to 50°C | -58° to 122°F  \u003cbr\u003eGlass Beads: -85° to 80°C | -121° to 176°F\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.25lb | 114gm \u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | 0.5°C \u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 12VDC \u003cbr\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e (2) CR2450 lithium coin cells (included) \u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e ABS plastic \u003cbr\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e 3M Dual Lock Reclosable Fasteners \u003cbr\u003e\u003cstrong\u003eDisplay Size:\u003c\/strong\u003e 1.4 x 2.0\" LCD \u003cbr\u003e\u003cstrong\u003eAlarm Output:\u003c\/strong\u003e Solid state alarm output (Open Drain) rated 12VDC 250mA\u003cbr\u003e\u003cstrong\u003eSensaphone Output:\u003c\/strong\u003e Current regulated output that simulates a 2.8K thermistor. For connecting to any Sensaphone that accepts 2.8K thermistors. \u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0208_TemperatureDisplay_Instructions.pdf\"\u003eVFC Refrigerator Temperature Sensor with Display Instructions \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-0120-VFC_CS.pdf\"\u003eVFC Refrigerator Temperature Sensor with Display Cutsheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Glass Bead Bottle","offer_id":51960001986871,"sku":"FGD-VFC-GBV","price":249.99,"currency_code":"USD","in_stock":true},{"title":"Glycol Bottle","offer_id":51960002019639,"sku":"FGD-VFC-GLY","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-0120-Left_WEB__83248.jpg?v=1776160784"},{"product_id":"wsg-wireless-room-temperature-sensor","title":"WSG Wireless Room Temperature Sensor","description":"\u003ch3\u003eWirelessly Monitor Room Temperature\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures temperature from -20° to 115°F | -28° to 46°C\u003c\/li\u003e\n\u003cli\u003eAccurate to ± 1°F |  ± .56°C\u003c\/li\u003e\n\u003cli\u003eCommunicates wirelessly with WSG30 base unit up to 300’ away\u003c\/li\u003e\n\u003cli\u003eIncludes two AA batteries\u003c\/li\u003e\n\u003cli\u003eOptional power supply available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eThe Wireless Room Temperature Sensor is used exclusively with the WSG30 system to measure ambient air temperature wherever the sensor is installed. When the temperature falls outside of the WSG30 system’s programmed high or low limit, the user will receive an alarm via text message or email. The sensor includes two AA alkaline batteries which will power the sensor for up to two years. An optional plug-in power supply is also available, in which case the batteries then become a backup if the main AC power fails. The wireless sensor can be placed up to 300’ away from the WSG30 or further if multiple sensors are used to create a mesh network.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e 32° to 115°F | 0° to 57°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C\u003cbr\u003e\u003cstrong\u003eWireless Range:\u003c\/strong\u003e 300' | 90m\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Wireless\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.1 x 3.9 x 1.1\" | 79 x 99 x 28mm \u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e WSG Wireless\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownloads:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG30-TMP.pdf\"\u003e\u003cspan\u003eWSG Wireless Room Temperature Sensor Cutsheet\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Clear Door","offer_id":51960002380087,"sku":"FGD-WSG30-TMP, FGD-WSG30-SENCD","price":239.0,"currency_code":"USD","in_stock":true},{"title":"None","offer_id":51960002412855,"sku":"FGD-WSG30-TMP","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-WSG30-TMP_WEB__25863.jpg?v=1776160793"},{"product_id":"wsg-wireless-temperature-sensor-w-external-probe","title":"WSG Wireless Temperature Sensor w\/ External Probe","description":"\u003ch4\u003eMonitor temperatures inside a refrigerator, freezer or other harsh environment\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe sensor's external temperature probe can be installed in a refrigerator, freezer or other harsh environment, while the sensor circuitry remains in a clean dry environment\u003c\/li\u003e\n\u003cli\u003eChoose between two temperature ranges; -20° to 115°F or -121° to 115°F\u003c\/li\u003e\n\u003cli\u003eAccurate to ± 1°F |  ± .56°C\u003c\/li\u003e\n\u003cli\u003eIncludes two AA batteries\u003c\/li\u003e\n\u003cli\u003eOptional power supply available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eWSG Wireless Temperature Sensors with External Probes are designed to work exclusively with the Sensaphone WSG30. This sensor circuitry includes a built-in radio transmitter. The \u003c\/span\u003esensors attach to a remote temperature probe\u003cspan\u003e so that temperature measurements can be made in a refrigerator, freezer or other harsh environments. The sensor is available in two temperature ranges; -20° to 115°F or -121° to 115°F. It comes with two AA alkaline batteries which will power the sensor for up to two years. An optional plug-in power supply is also available in which case the batteries become a backup if the main AC power fails.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -121° to 115°F | -85° to 57°C or -20° to 115°F | -28° to 46°C \u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C\u003cbr\u003e\u003cstrong\u003eWireless Range:\u003c\/strong\u003e 300' | 90m\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Wireless\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.1 x 3.9 x 1.1\" | 79 x 99 x 28mm \u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e WSG Wireless\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDownloads:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG30-TEX.pdf\"\u003eWSG Wireless Temperature Sensor w\/ External Probe Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG30-TEX85.pdf\"\u003eWSG Wireless Ultra Low Temperature Sensor w\/ External Probe Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"NIST Calibration \/ Ultra Low Temperature Probe (-121° to 115)","offer_id":51960002642231,"sku":"FGDWSG30TX85NST","price":319.0,"currency_code":"USD","in_stock":true},{"title":"NIST Calibration \/ Temperature Probe (20° to 115°F)","offer_id":51960002674999,"sku":"FGDWSG30TEXNIST","price":299.0,"currency_code":"USD","in_stock":true},{"title":"Standard Calibration \/ Ultra Low Temperature Probe (-121° to 115)","offer_id":51960002707767,"sku":"FGD-WSG30-TEX85","price":219.0,"currency_code":"USD","in_stock":true},{"title":"Standard Calibration \/ Temperature Probe (20° to 115°F)","offer_id":51960002740535,"sku":"FGD-WSG30-TEX","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-WSG30-ExternalSensors__41206.jpg?v=1776160804"},{"product_id":"wsg-wireless-temperature-sensor-in-buffered-bottle","title":"WSG Wireless Temperature Sensor in Buffered Bottle","description":"\u003ch3\u003eBuffer momentary temperature fluctuations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures temperature from -20° to 115°F | -28° to 46°C\u003c\/li\u003e\n\u003cli\u003eAccurate to ± 1°F |  ± .56°C\u003c\/li\u003e\n\u003cli\u003eChoose between a bottle filled with glass beads or glycol\u003c\/li\u003e\n\u003cli\u003eCommunicates wirelessly with WSG30 base unit up to 300’ away\u003c\/li\u003e\n\u003cli\u003eIncludes two AA batteries\u003c\/li\u003e\n\u003cli\u003eOptional power supply available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eThe Wireless Temperature Sensors are used exclusively with the WSG30 \u003c\/span\u003esystem to measure the temperature of objects in a refrigerator or freezer\u003cspan\u003e. By placing the sensor in a bottle filled with glass beads or glycol users will receive a reading that represents the temperature of the contents of inside of the refrigerator rather than the ambient air temperature. When the temperature falls outside of the WSG30 system’s programmed high or low limit, the user will receive an alarm via text message or email. The external probe is wired to the sensor with the included 12’ of wire. The sensor includes two AA alkaline batteries which will power the sensor for up to two years. An optional plug-in power supply is also available, in which case the batteries then become a backup if the main AC power fails. The wireless sensor can be placed up to 300’ away from the WSG30 or further if multiple sensors are used to create a mesh network.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -20° to 176°F | -28° to 80°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 1°F | .56°C\u003cbr\u003e\u003cstrong\u003eWireless Range:\u003c\/strong\u003e 300' | 90m\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic \u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.1 x 3.9 x 1.1\" | 79 x 99 x 28mm\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG30-GBV.pdf\"\u003eWSG Wireless Temperature Sensor in Glass Bead Vial\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG30-GLY.pdf\"\u003eWSG Wireless Temperature Sensor in Glycol Vial\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"NIST Certification \/ Temperature Probe in Glass Bead Vial","offer_id":51960003199287,"sku":"FGDWSG30GBVNIST","price":335.0,"currency_code":"USD","in_stock":true},{"title":"NIST Certification \/ Temperature Probe in Glycol Bottle","offer_id":51960003232055,"sku":"FGDWSG30GLYNIST","price":335.0,"currency_code":"USD","in_stock":true},{"title":"No Certification \/ Temperature Probe in Glass Bead Vial","offer_id":51960003264823,"sku":"FGDWSG30GBV","price":235.0,"currency_code":"USD","in_stock":true},{"title":"No Certification \/ Temperature Probe in Glycol Bottle","offer_id":51960003297591,"sku":"FGDWSG30GLY","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-WSG30-Buffers__16422.jpg?v=1776160816"},{"product_id":"wsg-wireless-temperature-sensor-with-rtd-probe","title":"WSG Wireless Temperature Sensor with RTD Probe","description":"\u003ch3\u003eMeasure Extreme Temperatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures temperature from -328° to 248°F | -200° to 120°C \u003c\/li\u003e\n\u003cli\u003eTwo size probes to choose from: 1\" or 14\"\u003c\/li\u003e\n\u003cli\u003eProbes include 10' of wire\u003c\/li\u003e\n\u003cli\u003eCommunicates wirelessly with WSG30 base unit up to 300’ away\u003c\/li\u003e\n\u003cli\u003eIncludes two AA batteries\u003c\/li\u003e\n\u003cli\u003eOptional power supply available\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Wireless Temperature Sensor with RTD Probe is used exclusively with the WSG30 system. It measures extreme air temperature in applications where traditional sensors will fail. The sensor is available with two different sized temperature sensing probes: \u003cspan\u003e1\" or 14\"\u003c\/span\u003e. The 14” probe is recommended for applications where the sensor cabling cannot be exposed to the cold atmosphere such as monitoring liquid nitrogen. Both probes come with 10’ of wire.\u003c\/p\u003e\n\u003cp\u003eWhen the temperature falls outside of the WSG30 system’s programmed high or low limit, the user will receive an alarm via text message or email. The sensor includes two AA lithium batteries which will power the sensor for up to two years. An optional plug-in power supply is also available, so the batteries serve as a backup if the main AC power fails. The wireless sensor can be placed up to 300’ away from the WSG30 or further if multiple sensors are used to create a mesh network.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -328° to 248°F | -200° to 120°C \u003cbr\u003e\u003cstrong\u003eRTD Element:\u003c\/strong\u003e PT100 - 385 ALPHA - CLASS - B\u003cbr\u003e\u003cstrong\u003eWireless Range:\u003c\/strong\u003e 300' | 90m\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Wireless\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.1 x 3.9 x 1.1\" | 79 x 99 x 28mm\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Element tolerance to IEC 60751 edition 2.0, par 5.1.2\u003c\/p\u003e\n\u003cp\u003eDownloads:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/FGD-WSG30-RTD_CS.pdf\"\u003eWSG Wireless Temperature Sensor with RTD Probe Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/LIT-0215_RTDinstructions.pdf\"\u003eWSG Wireless Temperature Sensor with RTD Probe Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"14\" RTD Probe","offer_id":51960005296439,"sku":"FGD-WSG30-RTD14","price":349.0,"currency_code":"USD","in_stock":true},{"title":"1\" RTD Probe","offer_id":51960005329207,"sku":"FGD-WSG30-RTD1","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-WSG30-RTD__88323.jpg?v=1776160823"},{"product_id":"ims-solution-indoor-temperature-sensors","title":"IMS Solution Indoor Temperature Sensors","description":"\u003ch3\u003eEasy temperature monitoring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnects to the IMS system via RJ-45 patch cable (not included)\u003c\/li\u003e\n\u003cli\u003eChoose between sensors that have a local LCD display or no display\u003c\/li\u003e\n\u003cli\u003eSensors with display measure temperatures from 32° to 95°F\u003c\/li\u003e\n\u003cli\u003eSensors without display measure temperatures from 5° to 140°F\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe IMS Room Temperature Sensors are used exclusively with the Sensaphone IMS system to measure and provide real time indoor air temperatures from 5° to 140°F or 32° to 95°F. The system will go into alarm when the temperature falls outside of the programmed high or low limit. The sensor comes in an attractive white plastic enclosure that can be mounted to a single gang electrical box or directly to the wall. The connection from the sensor to the IMS system can use your existing network wiring infrastructure, which allows the sensor to be installed in location away from the IMS host device.\u003cspan\u003e Choose between a local display with values displayed in °F, °C or no local display.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eTechnical Specifications:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eIMS-4810E: 5° to 122°F\u003cbr\u003eIMS-4810E-C: -15° to 50°C \u003cbr\u003eIMS-4811E: 32° to 95°F\u003cbr\u003eIMS-4813E: 0° to 35°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 3°F | 1.7°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e RJ45\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.5 x 2.8 x 1.3\" | 110 x 70 x 30mm \u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e IMS Solution\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_IMS-4810E.pdf\"\u003eIMS Solution Room Temperature Sensor Sales Brochure (IMS-4810E)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_IMS-4811E.pdf\"\u003eIMS Solution Room Temperature Sensor °F Sales Brochure (IMS-4811E)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_IMS-4813E.pdf\"\u003eIMS Solution Room Temperature Sensor °C Sales Brochure IMS-4813E)\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Room Temperature Sensor °F","offer_id":51960011030839,"sku":"IMS-4810E","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Room Temperature Sensor °C","offer_id":51960011063607,"sku":"IMS-4810E-C","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Room Temperature Sensor w\/ Display °F","offer_id":51960011096375,"sku":"IMS-4811E","price":255.0,"currency_code":"USD","in_stock":true},{"title":"Room Temperature Sensor w\/ Display °C","offer_id":51960011129143,"sku":"IMS-4813E","price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_IMS-4810_Left__88022.jpg?v=1776160939"},{"product_id":"ims-solution-mini-temperature-sensor","title":"IMS Solution Mini Temperature Sensor","description":"\u003ch4\u003eMonitor temperature in tight locations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures temperatures from 5° to 140°F | -15° to 60°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± 3°F\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eSmall size allows placement in tight locations\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eRequires RJ45 patch cable to connect sensor to Sensaphone\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor use in clean, indoor environments\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe IMS Mini Temperature Sensor is used exclusively with the Sensaphone IMS systems to measure and provide real time air temperatures from 5° to 140°F. The system will go into alarm when the temperature falls outside of the programmed high or low limit. The sensor comes in a small black enclosure that can be mounted in tight locations such as inside of server racks. The sensor may be secured inside equipment using double-sided tape (included) or with tie-wraps. The connection from the interface to the IMS system can use an existing CAT5 network wiring infrastructure, which powers the sensor and allows it to be installed in locations away from the IMS host device.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c!-- pagebreak --\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eTechnical Specifications\u003cbr\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e 5° to 140°F | 0° to 60°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 3°F | 1.7°C  \u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e RJ45\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.1 x .6 x 1.4\" | 54 x 15 x 35mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e IMS Solution\u003c\/span\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Mini Temperature Sensor °F","offer_id":51960011489591,"sku":"IMS-4812E","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Mini Temperature Sensor °C","offer_id":51960011522359,"sku":"IMS-4812E-C","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_IMS-4812_WithWire__30299.jpg?v=1776160946"},{"product_id":"ims-solution-ultra-low-temperature-sensor","title":"IMS Solution Ultra Low Temperature Sensor","description":"\u003ch3 style=\"font-weight: 400;\"\u003eMonitor temperatures as low as -85°C\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eOptional glass bead vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperatures from -121° to 53°F | -86° to 12°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAvailable with NIST certification\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe Ultra Low Temperature Sensors are designed to connect to the Sensaphone IMS product line and monitor temperatures in refrigerators or freezers. The electrical connection between the sensor and IMS unit is made via the attached RJ-45 patch cable. The sensor probe may be secured inside equipment using the included clamp or it may be hung using tie wraps. Do not install the black plastic enclosure inside of a refrigerator or freezer. This sensor includes a remote temperature probe so that temperature measurements can be made in a freezer or other harsh environments. The sensor is available with an optional glass bead vial which helps to prevent false temperature readings when a refrigerator or freezer door is opened or goes into a defrost cycle. In addition they are available with an optional NIST temperature certification.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cbr\u003eThe Ultra Low Temperature Sensors come with a 7′ cable with an RJ-45 plug on the end and a weatherproof probe with 12′ of cable. If the sensor installation is close to the IMS unit, you can plug it directly into an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input. \u003c\/p\u003e\n\u003ch3 style=\"font-weight: 400;\"\u003e\u003c!-- pagebreak --\u003e\u003c\/h3\u003e\n\u003ch3 style=\"font-weight: 400;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e -122° to 53°F | -86° to 12°C\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 3°F | 1.7°C  \u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e RJ45\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.1 x 1.3 x .6\" | 53 x 33 x 15mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e IMS Solution\u003cbr\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: Available with NIST Certification\u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_IMS-4814E.pdf\"\u003eIMS Solution Ultra Low Temperature Sensor\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_IMS-4815E.pdf\"\u003eIMS Solution Ultra Low Temperature Sensor in Glass Bead Vial\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"NIST Calibration \/ Ultra Low Temperature Probe","offer_id":51960012996919,"sku":"IMS-4814E-NIST","price":209.0,"currency_code":"USD","in_stock":true},{"title":"NIST Calibration \/ Ultra Low Temperature Probe in Glass Bead Vial","offer_id":51960013029687,"sku":"IMS-4815E-NIST","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Standard Calibration \/ Ultra Low Temperature Probe","offer_id":51960013062455,"sku":"IMS-4814E","price":129.0,"currency_code":"USD","in_stock":true},{"title":"Standard Calibration \/ Ultra Low Temperature Probe in Glass Bead Vial","offer_id":51960013095223,"sku":"IMS-4815E","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_IMS-4814_WithWire__11191.jpg?v=1776160953"},{"product_id":"ims-solution-temperature-sensor-w-external-probe","title":"IMS Solution Temperature Sensor w\/ External Probe","description":"\u003ch3\u003eEasy temperature monitoring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003eMeasures temperature from 32° to 176°F | 0° to 80°C\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eAccurate to ± 3°F\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eExternal probe allows monitoring of refrigerator or dirty environments\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eRequires RJ45 patch cable to connect sensor to Sensaphone\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eThe IMS Temperature Sensor with External Probe is used exclusively with the Sensaphone IMS systems to measure and provide real time temperatures from 32° to 176°F or 0° to 80°C in difficult environments or in areas where a traditional sensor won’t fit. The temperature sensing probe is attached to the sensor by 12’ of wire which allows it to be placed inside a refrigerator or in a dirty or humid environment while still keeping the sensor’s circuitry clean. The system will go into alarm when the temperature falls outside of the programmed high or low limit. The sensor may be secured using double-sided tape (included) or with tie-wraps. The connection from the interface to the IMS system can use an existing CAT5 network wiring infrastructure, which powers the sensor and allows it to be installed in locations away from the IMS host device.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e 32° to 176°F | 0° to 80°C \u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e 3°F | 1.7°C\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e RJ45\u003cbr\u003e\u003cstrong\u003eHousing:\u003c\/strong\u003e Plastic\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.1 x 1.3 x .6\" | 53 x 33 x 15mm\u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e IMS Solution\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDownloads\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_IMS-4816E.pdf\"\u003e\u003cspan\u003eIMS Solution Temperature Sensor w\/ External Probe Sales Brochure\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"Default Title","offer_id":51960013750583,"sku":"IMS-4816E","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_IMS-4816_2__44061.jpg?v=1776160960"},{"product_id":"sensaphone-wsg30-wireless-temperature-display","title":"Sensaphone WSG30 Wireless Temperature Display","description":"\u003cp style=\"font-weight: 400;\"\u003eThe Wireless Temperature Display is used exclusively with the Sensaphone WSG30 connects with all Sensaphone 2.8k and RTD type temperature sensors to provide an at-a-glance reading of the current temperature as well as the minimum and maximum temperatures. The display is ideal for any location where onsite staff need a quick, convenient visual reading of the sensor, saving them the time of checking the monitoring system's data.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThe Local Temperature Display:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLogs and displays the highest and lowest temperatures\u003c\/li\u003e\n\u003cli\u003eProvides an audible alarm for out-of-range temperatures\u003c\/li\u003e\n\u003cli\u003eOffers a relay output that can be programmed to turn on a light or siren for additional onsite alarm notifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"font-weight: 400;\"\u003eWhen the temperature falls out of the programmed high and low limits, the display triggers an audible alarm, immediately alerting onsite staff of a potential problem. This alarm is in addition to the alerts that the Sensaphone monitoring system sends to designated personnel when temperatures fall out of range.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThe temperature sensor display is easy to program by using the four buttons on the front. It connects to the sensor via screw terminals on the bottom and wirelessly with the Sensaphone WSG30. The display comes with a battery that powers it for up to one year, but you can also use an optional external power supply.\u003c\/p\u003e\n\u003ch3 style=\"font-weight: 400;\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eSensor Temperature Range:\u003c\/strong\u003e \u003cbr\u003e• 2.8k Room Temperature Sensor: \u003cspan\u003e0° to 120°F | -17° to 49°C\u003c\/span\u003e\u003cbr\u003e• 2.8k Weatherproof Temperature Sensor: \u003cspan\u003e-20° to 176°F | -28° to 80°C\u003cbr\u003e\u003c\/span\u003e• 2.8k Ultra Low Temperature Sensor: \u003cspan\u003e-121° to 176°F | -85° to 80°C\u003cbr\u003e\u003c\/span\u003e• 1\" RTD Temperature Probe: \u003cspan\u003e-326° to 248°F | -199° to 120°C \u003c\/span\u003e\u003cbr\u003e• 14\" RTD Temperature Probe: \u003cspan\u003e-326° to 248°F | -199° to 120°C \u003c\/span\u003e\u003cbr\u003e• 2.8k Temperatur Sensor in Glass Bead Vial: \u003cspan\u003e-20° to 176°F | -28° to 80°C\u003cbr\u003e• 2.8k Temperatur Sensor in Glycol Vial: -20° to 176°F | -28° to 80°C\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Wireless\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.1 x 3.9 x 1.1\" | 79 x 99 x 28mm \u003cbr\u003e\u003cstrong\u003eSensor Series:\u003c\/strong\u003e WSG Wireless\u003cbr\u003e\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e 32° to 122°F | \u003cspan\u003e \u003c\/span\u003e0° to 50°C\u003cbr\u003e\u003cstrong\u003eOperating Humidity:\u003c\/strong\u003e 5- 90% RH non-condensing\u003cbr\u003e\u003cstrong\u003eRange (Indoor\/Urban)\u003c\/strong\u003e: Up to 300’ \u003cspan\u003e| \u003c\/span\u003e90m\u003cbr\u003e\u003cstrong\u003eTransmit Power Output:\u003c\/strong\u003e 79 mW\u003cspan\u003e  \u003c\/span\u003e(+19 dBm)\u003cbr\u003e\u003cstrong\u003eOperating Frequency:\u003c\/strong\u003e ISM 2.4 GHz\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.65 x 3.7 x 1.1”\u003cspan\u003e | \u003c\/span\u003e118 x 94 x 28mm\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.40 lb. | 181 gm\u003cbr\u003e\u003cstrong\u003eAccuracy:\u003c\/strong\u003e +\/- 1°F | 0.56°C\u003cbr\u003e\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 5VDC\u003cspan\u003e  \u003c\/span\u003e1A (optional, part # XFR-0046)\u003cbr\u003e\u003cstrong\u003eBatteries:\u003c\/strong\u003e (2) AA lithium cells will power the sensor for up to 3 years\u003cbr\u003e\u003cstrong\u003eHousing Material:\u003c\/strong\u003e ABS Plastic\u003cbr\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e 3M Dual Lock Reclosable Fasteners\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3 style=\"font-weight: 400;\"\u003eDownloads:\u003c\/h3\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG-LCD85.pdf\"\u003eSensaphone WSG30 Wireless Temperature Display with Ultra Low Temperature Sensor Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG-LCDRM.pdf\"\u003eSensaphone WSG30 Wireless Temperature Display Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG_LCDR1.pdf\"\u003eSensaphone WSG30 Wireless Temperature Display with 1\" RTD Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG-LCDR14.pdf\"\u003eSensaphone WSG30 Wireless Temperature Display with 14\" RTD Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG-LCDT.pdf\"\u003eSensaphone WSG30 Wireless Temperature Display with Weatherproof Temperature Sensor Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG-LCDGBV.pdf\"\u003eSensaphone WSG30 Wireless Temperature Display with Glass Bead Vial Cutsheet\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/CS_FGD-WSG-LCDGLY.pdf\"\u003eSensaphone WSG30 Wireless Temperature Display with Glycol Vial Cutsheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Sensaphone","offers":[{"title":"2.8k Room Temperature Sensor","offer_id":51960050811191,"sku":"FGD-WSG-LCDRM","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2.8k Temperature Probe","offer_id":51960050843959,"sku":"FGD-WSG-LCDT","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2.8k Temperature Probe with NIST Certification","offer_id":51960050876727,"sku":"FGD-WSG-LCDTN","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2.8k Ultra Low Temperature Probe","offer_id":51960050909495,"sku":"FGD-WSG-LCD85","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2.8k Ultra Low Temperature Probe with NIST Certification","offer_id":51960050942263,"sku":"FGD-WSG-LCD85N","price":0.0,"currency_code":"USD","in_stock":true},{"title":"1\" RTD Probe","offer_id":51960050975031,"sku":"FGD-WSG-LCDR1","price":0.0,"currency_code":"USD","in_stock":true},{"title":"1\" RTD Probe with NIST Certification","offer_id":51960051007799,"sku":"FGD-WSG-LCDR1N","price":0.0,"currency_code":"USD","in_stock":true},{"title":"14\" RTD Probe","offer_id":51960051040567,"sku":"FGD-WSG-LCDR14","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2.8k Temperature Probe in Glass Bead Vial","offer_id":51960051073335,"sku":"FGD-WSG-LCDGBV","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2.8k Temperature Probe in Glass Bead Vial with NIST Certification","offer_id":51960051106103,"sku":"FGD-WSG-LCDGBVN","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2.8k Temperature Probe in Glycol Vial","offer_id":51960051138871,"sku":"FGD-WSG-LCDGLY","price":0.0,"currency_code":"USD","in_stock":true},{"title":"2.8k Temperature Probe in Glycol Vial with NIST Certification","offer_id":51960051171639,"sku":"FGD-WSG-LCDGLYN","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/0061\/0359\/files\/PH_FGD-WSG-LCD_Left__41931.jpg?v=1776161070"}],"url":"https:\/\/sensaphone.com\/collections\/temperature-sensors.oembed","provider":"Sensaphone","version":"1.0","type":"link"}